Why still using the imperial system?
Why still using the imperial system?
There are numerous measurement systems in the world. Why not use a system that will be easily recognized around the world?
Really though, the most ardent defence of USC units is fuelled by great amounts of Copium. The US Customary set of measurements is several independent systems of measurements which often radically different origins and sometimes irrational conversions, all stacked upon each other and dressed in a trench coat. For instance, the mile has Roman origins while the inch and foot were defined separately, much later, and with a lot of regional variation. The French foot was longer than the English foot, which is why Napoleon was listed as 5'2" tall while he was actually closer to 5'9", or 1.71 m, which was pretty average for the time.
Which one of these is more straightforward to calculate:
-
You are tasked with installing a rail along a 1 mile long bridge. You know you can use two half inch bolts to affix it every three feet. How many bolts do you need?
-
You are tasked with installing a rail along a 1,5 km long bridge. You know you can use two M12 bolts to affix it every metre. How many bolts do you need?
Conversions within dimensions in USC require you to memorise arbitrary conversion numbers. Conversions within dimensions in SI require you to move the comma a few spots.
Besides, if the US Customary system of units is so great, why did most of the world voluntarily switch to SI units?
Good example with the Bridge, it's exact the point with the USC units, source of fatal errors.
-
Everything in America except building trades has transitioned to metric already.
Even our imperial units are defined in metric.
But... PLEASE don't tell our citizens. It will all be fine as long as we don't tell them!
This is exactly my experience. I've worked for four different manufacturing companies in the Midwest. Three of them were multi billion dollar companies. All four of those companies used metric almost exclusively.
Such a stupid misconception that is constantly reposted
I have to agree 100%. The slavish devotion of small brained regressive idiots to base 12 time keeping has bugged me for fucking ever. Swatch solved this decades ago, but people are too stuck in their "But this is what we've always used" bullshit mindset.
Base 12 is better than base 10. In an alternate universe we use it for everything and it’s a utopia. There is world peace and no one is hungry.
12 is evenly divisible by 2, 3, 4, and 6. 10 is only evenly divisible by 2 and 5.
(Fun fact, Tetris in that alternate universe doesn’t have the stupid Z and S Tetronimos. People are happy there.)
I'm basically forced to know the good way, and the American way.
Yanks stop trying to claim things as your own.
For anything construction-scale, all supplies sold in the US are based on 4x8' sheet goods and 16-24" on-center framing. I also concede that king George the 74th's foot length is more human-scale when dealing with large measurements: 20 feet vs 6096 mm. I still use metric when possible, however - I find it easier and more accurate.
For EVERYTHING else I've switched to using metric.
Context: I grew up in the US using imperial units and only pivoted to the metric system in 2020. If I grew up thinking in metric and building supplies/standards used it, it'd be superior in every way.
TL;DR I like my imperial/metric combo tape measure.
6096 mm does sound really stupid when you could just say 6.096 m.
All plans use mm exclusively. Airport blueprints, for example, are in mm. At first blush it seems excessive, but it makes sense from a consistency & accuracy POV - 6.096m takes up 2 more characters than 6096 - they don't even need to specify the units "mm", because it is assumed, and anything else introduces room for error.
Metroids itt btfo, malding, fractionally mogged upon.
I’m terrified of driving the day they move the US from miles to kilometers. People go well over the speed limit as it is. I can only imagine how many people would read the kilometer per hour speed limit as miles.
England still has their speed limits in mph and all road signs are in miles and yards…
I had never considered this before, but you're absolutely right
There are (huge) costs to retooling production to move from imperial to metric. Even if a company wanted to make that move they'd have to transition in phases and will likely end up with additional equipment to maintain. There's also significant training for workers (who will likely commit errors in the beginning) which will impact production. And what happens to the old equipment? I'd guess a significant portion of that would end up getting scrapped and landfilled.
@Zerush Too much hassle to change to metric
But if isn't.
- start by putting metric units next to the SAE units in the labels
- Eventually people get used to the units and then you phase out the use of them.
All science and most of the mechanical engineering is done in metric already. If you have a car made in the last 20 years ask the fasteners are already metric. So it really isn't that hard..
We already do that. Looking at a bottle of tea I drank earlier today and it says 16FL OZ (473mL) both units are labeled on most things.
Ford still uses SAE bolts/screws for door panels, but not always.I only keep metric sockets and wrenches in my box, but have to keep a 1/4" socket just for the random Ford I have to work on.
With that attitude it will be. Just because it's a hassle does not mean it's not worth doing.
My country
menfolk are fools.Perhaps I'm biased, but sometimes it's easier to work in fractions. Also, setting room temp is objectively better in F. I can tell the difference between 74 and 75. That said, I'm also a scientist so I'm permitted these opinions.
No, you are not permitted these decisions because you are something.
Its still bias
I really like Farenheit system for temperatures. 0 is really cold and 100 is really hot, but both survivable. It's a human-centric system.
0C is the temperature that water freezes, which is good but temperatures more often go negative with that system. 100C is boiling so you'd be dead.
What's so special about the 0 - 100 range? For either system, there's temperatures that have significance.
-20 C is getting dangerously cold (wear all winter gear available if you must be outside for anything longer than brief durations).
-10 C is very cold (winter coat, gloves, hat).
0 C is freezing (winter coat necessary, gloves and hat optional).
10 C is chilly (winter coat unzipped, or jacket and sweater).
20 C is comfortable (t-shirt and pants).
22 C is about room temperature (shorts become viable above this).
30 C is hot (nude comfortable; minimize clothing).
40 C is getting dangerously hot (depending on humidity and personal heat tolerance) (clothing that protects from heat might be more desirable than minimising clothing).
I really like Farenheit system for temperatures. 0 is really cold and 100 is really hot, but both survivable. It's a human-centric system.
I used to make this argument, that Fahrenheit made more sense for weather, but I decided to be (somewhat) scientific about it and test the hypothesis (with a sample size of 1).
So I switched everything I own over to Celsius and set about teaching myself.
This was back in 2019, and here I am still using Celsius 5 years later. I like it a lot more than Fahrenheit.
A couple of major reasons: first, you don’t actually need the precision Fahrenheit gives you for weather. The difference between 68°F and 69°F is so small that degrees Fahrenheit have very little meaning. It was startling to me how quickly I came to understand the differences between degrees Celsius because they have a lower resolution. And of course you can always use half degrees if you need to, but honestly it’s fine without.
What I realized is that, very often, the temperatures that you see on weather reports or apps are really just the Celsius degree values converted and rounded. For example, you’re far more likely to see 68°F or 70°F rather than 69°F, since 20°C=68°F and 21°C=69.8°F. This isn’t true for every weather source, but it was still interesting.
But more importantly, 0 is freezing.
This never seemed like it mattered when I was using Fahrenheit. I know 32°F is freezing, if it’s below that it’s gonna be snowing instead of raining. But the first winter I experienced in Celsius was eye-opening.
I realized that temperatures below freezing in Fahrenheit never really meant much to me. This is sort of hard to explain, but while I knew they were progressively colder there wasn’t much specific understanding. That is, 23°F doesn’t really mean anything to me.
But -5°C? That instinctively meant something to me the very first time I experienced it in Celsius. That’s going to be as far below freezing as 5°C is above freezing. No math involved. Simple. Valuable. Obviously you can do the math to figure the same thing out in Fahrenheit, but with Celsius you don’t need to.
Once you get to know the numbers, it’s just as good as an other system of measurement, and I find I like it more for the weather than I like Fahrenheit.
I've read that it is more easily divisible than metric.
Divide a meter by 3 or 4 and get ugly numbers but a foot or yard divide by 3 or 4 quite cleanly. And so on.
Depending on your application this can be very helpful.
Divide a metre by 4 and you get 0.25 meters or 25cm
Dived a foot by 4 you get 3 inches.
Dived a yard by 4 you get 9inches
Metric here wins in my opinion.
Now let's go by 3
1m by 3 is yes 33.3r not great but 1m is 100cm and that's how it is.
1ft by 3 is 4 inches. Sure looks great now.
Except size resolution is far greater in metric in simple forms
Every inch is 2.54 cm obviously they dont round up nicely.
Once we have to go smaller than an inch we need 15/16s of a inch, smaller then a cm we drop down to mm.
10mm makes a cm.
In super practical terms i need a spanner, 16mm is to big, i get the 15 next.
5/8 is to big what do i get next?
(I know the answer)
Also another argument is well whats if you need half a mm etc we just use 0.5m or 0.7mm etc
Very small sizes for most everyone day to day.
Sure it's not great breaking it too 0.whatever, but metric does it so much smaller as imperial made that jump to incorporate a size smaller then an inch.
1/4 inch is just 0.25 inches
Division no is the problem in one unit, inch, feet, etc, because use fraccions instead of decimls, but the problem is the conversion from inch, feet to others (yards, miles), which is the source of a lot of errors, like those from the Mars probes or some catastrophigs breaks of bridges in the past, apart of some problems in physics, because using for weught and mass the same unit. No, imperial are not human measures, never has been since humans count with 10 fingers.
It's easier for handling real things.
Try doing woodwork in feet and inches for a day. Try it in metric for a day. You'll see what I mean.
It was crafted for the human-scale, whereas metric was worked out on paper by French philosophers.
I am willing to bet that you are simply more used to the imperial system.
I am not convinced that it has any objective advantage over the metric system.
My foot is about 50% larger than my SO's, but I can perfectly invision 30cm whenever I want or need to.
Cooking too. Try baking a cake in the two.
Pounds-and-ounces is all like "two eights is sixteen", "three threes is nine". Nice and handy multiples is what it's made on.
I'm about equally familiar with the two.
Human scale? Not yours or mines, measures of the ffoot, thumbs and random desires of a dead British King in the far past. No problem in metrics, at least if I don't build a hut in the wood with an axe, then maybe using parts of the body for measures are usefull. Not the first furniture I made, also working in metal. Also in mathematic and physic the metric system is way better (Even NASA now uses the metric system since 2 probes crashed on Marte due to calculation errors in the imperial system)
I doubt it had much to do with kings, as they didn't do handicrafts or have to measure things like grocers/traders do.
That image is really stupid, too much wrong with it to go thru.
Woodworker in US here, and I prefer metric. Also consider the thickness of plywood is actually in metric now - "3/4" is actually 18 mm but they have to market it as 23/32.
I've chosen to join the other 8 billion people on earth.
Are you telling us that you are actually making, say a box, by measuring it with your hands and feet? That’s barbaric! I’m guessing you actually use a tape measure like the rest of us.
I like imperial for big things. like you said it's easier. For small things like 3d printing and such I prefer metric (basically anything with increments smaller than 1/16"). It just depends on what scale you need to work on.