Just the other day I tried to remove pipewire from my system but didn't look at the list of packages to be removed... Turns out it removed gnome desktop and so booted into CLI 🤦♀️
I wanted to reinstall my Gentoo system. A SUSE (back before OpenSUSE) disc was the newest distro I had lying around. I thought it shouldn't matter from which system I do the install, Gentoo won't care.
So I repartitioned /dev/hda, installed the base system and went to set up my mount points. Only to discover that my data drive was gone. Stupid SUSE labeled the drives differently. /dev/hdb was my old system drive and I had repartitioned my old data drive.
Taught me to really check which drive was which. I wouldn't touch SUSE again for decades because of this.
I think I posted this before in some other thread, but one time back when I used to use Ubuntu, I opened my laptop and the screen was upside-down. Everything worked perfectly, but just upside-down. I went through every display setting I could find, trawled through forums for hours (on a different, non upside-down computer) and got absolutely nowhere. It was at the point where I was thinking I'll probably have to reformat and start over and this will forever be a mystery.
Then I accidentally solved it when my Playstation controller battery got low and I plugged it into the nearest USB port to charge, which was my laptop. As soon as I plugged it it, the screen flipped back the right way. As it turned out, Ubuntu was talking to the controller and had for some reason interpreted the gyroscope movement as 'rotate screen' the last time I charged it. After a couple of minutes of waving the controller around and watching the desktop spin while going "huh", I just unplugged it when it the right way round and crisis averted!
I set up a cron task and it was meant to do a super scuffed sendmail if there was a problem, there was about 20GB on the spool before I noticed and the pi's SD card was full
A few years back, I was installing Arch on an external hard disk. I was basically done, so I powered off the system, but I forgot to unmount the hard disk.
Then I tried to boot to the OS on my computer, which was also Arch, and it got stuck at the BIOS splash screen. No luck rebooting.
I remember panicking (because that was my only machine) and asking my computer teacher what to do and he also had no idea.
I ended up manually unplugging and replugging the hard disk inside the case and it worked. To this day I still don't know what went wrong.
I may have posted this before, but...late last year I realized my Debian server with circa 2009 hardware, with 4 gb of RAM and Core 2 Quad processor, was no longer up to the tasks I wanted it to perform; in particular, running a Home Assistant server. Back in 2018 or so, I added a software Linux RAID5 array with 5 active 3 TB drives and one hot spare, along with a "cold spare" that I've never actually used.
So, early this year, I bought hardware to upgrade my desktop machine, which was still plenty fast for me, and move the guts to my server. This is how my server usually gets upgraded. Upgrade the desktop machine, give it a few days or weeks to make sure it's stable, and then upgrade the server.
I installed the hardware without a problem, booted it up, and everything seemed okay, except that I ...couldn't access the RAID. At first it was like, well, I'm sure it's nothing serious, but then when mdadm could even FIND it, I started to get extremely worried. Fear set in.
Long story short: When I built the RAID, I followed directions that used the entire discs as the RAID, instead of making a partition on the disc and using that partition. The old motherboard didn't care, but the new one saw the bare discs and was like, "Hey, those are messed up, I'll fix the partition table for you!" Turns out, building Linux RAIDs by using the full discs like that is a VERY BAD IDEA for exactly this reason - but there are still guides out there showing that method and not mentioning the risks.
I was panicking. I spent days trying to figure out what to do and nothing was working. I was asking for help on the Linux-RAID list (and most of them were as helpful as they could be). Unfortunately my backups were NOT up to par (something I should have checked before starting), and I was at the point where I was like, well, I've lost x, y, and z.
I had basically given up and was just recreating the RAID using the "create command" then trying to see if I could mount the drive read-only. With 6 drives, there are quite a few possible combinations that could be the right one. If I remember correctly, I was able to figure out which drive was the spare, so I could limit my searches to the other 5, and knowing all 5 were in use, it was a matter of trying different orders. I think I got close one time and ext4 gave me weird read error, so after that I swapped two drives, and hit the right order.
Eventually .... I found it. I found the right combination and could reload it! Everything was there, untouched! As quickly as I could, I copied everything to a 10 TB drive I bought and installed into the desktop system. I saved the command, rebooted, and the same thing happened again - so it was definitely a motherboard problem - but this time I knew how to recreate it, and did so.
Since I now had a backup, I partitioned each drive and rebuilt the array using partitions...and I saved every piece of data I could think of about building the array, outputs of mdadm, outputs of /proc/mdstat, partition IDs, etc. Naturally, having that info likely means I'll never need it.
I was so relieved when I saw that mount command work without error. I spent close to a week worrying about it, and in that moment it was a huge rush.
New setup handles HA and other duties with aplomb and is very reliable, so in the end it was very worth it.
This is less "silly" and more "horrifying". Sorry.
Well written, and I learned a few things from this story. I recently started a cloud of my own with 4 20TiB HDDs in a raid 5 configuration so this story felt very prescient to me. Makes me very grateful for the simplicity of Cockpit and LUKS2.. my setup felt so trivial to configure!
I deleted my desktop environment during an apt upgrade, not once, but twice. Bad habit of not actually reading the messages that pop up properly - it did ask me if I wanted to delete it all, and I just said "yea lol lfg". There was some conflict with a third party PPA that caused this.
Didn't know that had happened to begin with. I was stuck on the session manager login screen and it just wouldn't proceed after entering password. First time I just reinstalled Linux, and the second time I found out how to reinstall it from tty. This is how I learned about tty as well.
Not a software one, but back when I was a teenager doing hardware modifications (or attempting to at least), I had a very valuable to me Atari 130XE computer (35 or so years ago) I wanted to solder in some extra RAM or some chip (I don't recall now) but I had problems removing the old one so I called up my friend who did electronics repair the Mainboard. It was raining that night I took it to him so I did what I thought was best. Put it in a black garbage bag to protect it. Lets just say the next morning is when I found out that Static + circuit boards is a bad thing. Never more than a valuable less for me than at that time. He was a good friend though and out of the goodness of his heart, he gave me a replacement one so I wouldn't be without. (Mind you, these were out of production and considered obsolete at the time maybe worth $40 at the time) and not yet vintage as they would be seen today where in some markets can fetch upward to a few hundred more as is.
I had an accident when i tried to change my Debian from using APT package manager to Slackware Pkgtools. When i made a package for Pkgtools, i used Pkgtools built-in chown (which is "Sloppy" according to manpage) and it didn't just change ownership of the package but also my user folder and files inside my user folder. Because it, my Waydroid had errors
My worst one was accidentally overwriting my backup when trying to clone it.
I was using a standalone drive cloning device and I mixed up the "source" and "target" slots. It was a 4tb drive so the operation took about 3 hours.
At the end, i plugged in the clone to check it and saw that it was blank. I ended up having to make a new backup before i was able to try the cloning again.
Since it was a backup, nothing of value was lost, but it sure was a waste of an afternoon
I once tried to log in into my arch workstation, and the password just didn't work. I had used that password and had not switched distros for 6+ months, and one day it started saying that my password is incorrect. Not just the user password but also the root password. Stopped using arch since that day