Skip Navigation
InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)KN
knapoc @lemmy.world
Posts 0
Comments 6
Trigger automation 15 minutes before Alexa alarm.
  • There are probably multiple ways to solve this...

    Here's an approach I'd choose (note that I do not use Alexa, so my knowledge about the integration's capabilities is limited):

    1. define an input datetime used as an alarm time.
    2. allow Alex to manipulate this input datetime
    3. use a template trigger to compare the current time with the defined alarm time - and yes you can do calculation; e.g., automations triggers when current time = (alarm time - 20 minutes)
    4. trigger the alarm from within home assistant by either using a delay in the same automation or use a separate automation triggered at alarm time.
  • Parse multiple devices from a single mqtt topic?
  • You mean that you just want to have one configuration entry? I doubt that it's possible.

    What you could do is creating multiple entries, but you need filter within a template.

    {% if value_json['tags'].path == '/mnt/hdd' %}
        {{ (value_json['fields'].used_percent | float(default=0)) | round(2) }}
    {% else %}
        {{ states('sensor.disk_use_percent_sdb3') }}
    {% endif %}
    

    Having had a similar use case, I ended up configuring device specific topics within telegraf.