Hello,

I am looking for a good way to mount a daughter board to a motherboard that can be hot swappable. I would like it to be able to mount securely preferably with mechanical clips or fixings.

There will be up to 10A to go through it for power as well as around 10 signal pins. Obviously I can use several pins to get the required current rating.

I have seen DIN 41612 connectors but I am concerned about the daughter board coming loose.

If anyone can help me it would be much appreciated 😊

Hi there,

I'm considering upgrading my old ender 3 and it looks like the prusa MK4 or bambu labs p1s are the current best options out there.

I like the bambu labs for the fast print speed and x/y print bed. I also love the idea of the AMS - it would be awesome to print in colour! But being closed source puts me off a bit as I currently use octopeint and obico to monitor my ender 3 which, as far as I can tell, Is not possible to use with bambu labs. Also having to upload gcode to the cloud is not ideal.

The prusa however is great because of the open source nature. However the slinger bed and slower prints are putting me off. I have also read that the mmu can be temperamental at best, so printing colour may not be an option?

Any thoughts/recommendations?

Thanks

Hey, does anyone here have any drunkenslug invites that they would be willing to give me? It would be much appreciated! Thanks!

Hi there,

I wish to run a wireguard docker through a glueton docker so that i can access my paid vpn from my own server. This is what i want:

client -> wireguard docker(selfhosted) -> gluetun docker(connected to paid VPN) -> internet

I have posted before with this issue but still cannot get it to work as expected. I am not sure if there is issues with the wireguard docker not being able to route back through from gluetun as it is trying to force traffic through the tunnel.

Any help would be much appreciated.

docker-compose.yml: ``` services: gluetun_test: image: qmcgaw/gluetun container_name: gluetun_test cap_add: - NET_ADMIN ports: - "5010:5000" - "5011:8000" # Port of the WireGuard VPN server - "36843:36843/udp" environment: - VPN_SERVICE_PROVIDER=custom - VPN_TYPE=wireguard - WIREGUARD_PUBLIC_KEY= - WIREGUARD_PRIVATE_KEY= - VPN_ENDPOINT_IP=ip - VPN_ENDPOINT_PORT=port - WIREGUARD_ADDRESSES="10.2.0.2/32"

wireguard: image: linuxserver/wireguard:latest container_name: wireguard cap_add: - NET_ADMIN environment: - PUID=1000 - PGID=1000 volumes: - ./wireguard/config:/config

ports:

# Port for WireGuard-UI

- "5010:5000"

# Port of the WireGuard VPN server

- "36843:36843/udp"

network_mode: service:gluetun_test sysctls: - net.ipv4.conf.all.src_valid_mark=1 ```

wg0.conf ```

Address updated at: 2023-07-08 18:51:31.120262753 +0000 UTC

Private Key updated at: 2023-05-09 18:59:02.233090133 +0000 UTC

[Interface] Address = 10.252.1.0/24 ListenPort = 36843 PrivateKey = MTU = 1450 PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE Table =

[Peer] PublicKey = PresharedKey = AllowedIPs = 10.252.1.1/24 ```

I have a paid external vpn(Nordvpn using gluetun) and am currently hosting my own wireguard vpn on my server through docker. is there a way to get the traffic from my selfhosted vpn to tunnel through my paid vpn? This is my docker-compose file atm. ``` services: gluetun_test: image: qmcgaw/gluetun container_name: gluetun_test cap_add: - NET_ADMIN ports: - "5010:5000" # Port of the WireGuard VPN server - "36843:36843/udp" environment: - VPN_SERVICE_PROVIDER=nordvpn - VPN_TYPE=wireguard - WIREGUARD_PRIVATE_KEY=redacted - SERVER_COUNTRIES=United Kingdom

wireguard: image: linuxserver/wireguard:latest container_name: wireguard cap_add: - NET_ADMIN environment: - PUID=1000 - PGID=1000 volumes: - ./wireguard/config:/config

ports:

# Port for WireGuard-UI

- "5010:5000"

# Port of the WireGuard VPN server

- "36843:36843/udp"

network_mode: service:gluetun_test wg0.conf [Interface] Address = 10.252.1.0/24 ListenPort = 36843 PrivateKey = redacted MTU = 1450 PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE Table = ```

Any help would be great! Thanks!