Skip Navigation
Prismo Prismo @lemmy.world
Posts 5
Comments 60
iOS keyboards that don't censor "bad words"
  • I added some swear words as contact names, this is one way to get around the fucking censorship

  • Antivax quacks are continuing to make up fantastical biological mechanisms for COVID-19 vaccine “shedding”
  • Does mean that the unvaccinated anti-vaxers will keep away from the vaccinated??

  • What would you like to see in a house IT setup?
  • At least one cat 6 ethernet in each room. Multiple outlets in any media room. One of my old houses had speaker jacks in each corner of the room which was a godsend when setting up surround sound for a home cinema setup.

  • Is there a term for a gathering of trees in an open field?
  • Copse was my initial thought, but there is also the word Spinney.

    https://www.dictionary.com/browse/spinney

  • Multiple email signatures

    I’ve just switched from multiple email accounts to using the 5 custom domains for iCloud. However, now I’ve lost the per email custom signatures. Is there any way to get this back within the iCloud custom domain setup?

    0
    Men Over 30: What's one recipe or dish that you'd consider your go-to
  • Puttanesca or risotto. Both relatively easy to make, tale about 40 mins and are delicious!

  • Hair probably had an important function at some point in human evolution but now it's mostly cosmetic
  • I guess I’ve been looking at it wrong the whole time! Although, living in the countryside would be preferable for moustache-rainwater

  • Hair probably had an important function at some point in human evolution but now it's mostly cosmetic
  • I appreciate the usefulness of my eyebrows to divert rain away from my eyes. I do not appreciate my moustache’s water gathering properties when walking in humid environments.

  • Do you sit at a desk and keyboard for multiple hours? If yes, please recommend a good chair.
  • Surprisingly this chair has come out highly in reviews when compared to 4 figure chairs. I have it and can say it is very comfortable. It’s not going to be the best of the best, however if your budget doesn’t stretch to more than mid-3 figures this could be a good alternative.

    https://www.ikea.com/gb/en/p/markus-office-chair-vissle-dark-grey-30261152/

    https://www.shortlist.com/lists/best-office-chairs-401080

  • Your username has suddenly become your only means of staying alive. How bad is it?
  • I’m pretty sure I’d be ok in multiple realities

  • I’ve just turned 40. What advice would you older lemmy users give me?
  • So if you’ve had chickenpox your predisposed, not immune?

  • How do you decide what to do with your beard?
  • I just do a moustache as my beard doesn’t grow very thick.

  • Trying to revive this community. What are your best advice for a health long-term relationships in your 30s?
  • Listen, really listen to them. Put yourself in their position and really empathise with them. Remember and reaffirm regularly that you are a team and that you both have the others interests at heart, you should be one unit against the world.

    If you get mad or argue, apologise, it doesn’t matter who is right, you’re apologising for upsetting them.

    Do things together, and separately, share your experiences.

    Try and eat facing each other when you can, with all the screens around it can really be easy to forget that face to face contact.

    Never go to sleep with unresolved issues, don’t be afraid to be honest about why you are upset, and make them feel comfortable doing the same.

  • Men over 30, how often do you see your friends?
  • A lot less than I would like. My best friends maybe once a month or two, other friends once or twice a year. In my twenties we would all see each other a few times a week. People have moved to different cities, had families or are generally to tired from work or have lots of commitments. Also, covid really fucked the routine of seeing friends often. It definitely made me more reclusive.

  • Europe’s deepest mine to become giant gravity battery
  • Yeh, again I’m not sure how efficient using water is but my instinct says it will be a lot better than any mechanical system as they are generally very inefficient!

  • Europe’s deepest mine to become giant gravity battery
  • I’m going to preface this by saying, all I know is that know about the subject was one physics class in college… The teacher mentioned Hydro Pump Storage that pumps water into a reservoir when there is an excess of energy generation then releases it through turbines when there is a surge is energy needs on the grid. Wouldn’t this idea work in a very similar way? If so it would seem feasible as about 15% of the UKs STOR requirements are met in this way.

    https://www.nationalgrid.com/sites/default/files/documents/STOR Fuel Type Analysis Summary (By Capacity) - Season 8.5 - Final_0.pdf

    https://www.sse.com/news-and-views/2023/03/britain-s-largest-pumped-hydro-scheme-in-40-years-gets-100m-investment-boost/

  • I’ve just turned 40. What advice would you older lemmy users give me?
  • Nice! Maybe I should post my experiences from turning 40 onwards!

  • Possible over extrusion, any advice appreciated!

    https://i.imgur.com/yzJg1ne.jpg

    https://i.imgur.com/IgVP7Fj.jpg

    Any ideas on this new issue only affecting one of my printers, only seems to be on the bottom layers of a base mode print. The layers that are not done as one continuous spiral. Photos are before and after, ignore the banding on the before! (Thats another issue I have fixed)

    Can’t figure this one out, driving me mad as I have orders to fulfil

    Solved:

    So a combination of three changes finally got me back the correct result.

    1. Changed the nozzle for a brand new one, that helped a lot but still had a fee issues.
    2. Remeasured my extrusion amount and recalibrated the e-steps, they had gone quite a way out.
    3. Reduced the temp by 10°C apart from the first layer.
    8

    Help with intermittent extrusion issue

    imgur.com imgur.com

    Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users like jamidodger99.

    Normally slopes on my prints look fine, but recently I’ve been getting bad extrusion on some prints but not all. Same materials, same print file. Could this be one of the motors starting to fail? Printed on an ender 3.

    Edit: so changing the POM wheels did nothing. However, I did notice while printing the layers weren’t cooling as much as they should before the next layer started. So maybe there could be a fan issue.

    16

    This guy is my best friend. Dylan.

    imgur.com I love cat

    Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users like jamidodger99.

    6