Right, but the opener is already there and installed. Plus, it does give you all the information and control over that interface. Buying a ratgdo for $30 and adding it into your Liftmaster opener is still a better situation than a dumb opener and a dumb switch. The dumb switch doesn't give you open/closed/stopped status, lights, etc.
If I were to buy a new opener, I would probably get a liftmaster + ratgdo again anyway
I don't know about him, but I really don't want to be screwing around replacing my openers
That would be neat, but I really doubt it will ever happen
What don't you like about ratgdo? It seems pretty good on paper, I've not yet got one in my hands. Hopefully soon
What I can't figure out now is if I want to replace OpenGarage when my Ratgdo arrives. It has a lot more features, but do I care now I have OpenGarage setup? Unsure
This posts details how I ditched Liftmaster MyQ and switched to a much better, completely selfhosted and local way of controlling my garage door with OpenGarage, and the problems I ran into with both solutions, and how I overcame them. MyQ In my garage I have a Chamberlain Liftmaster Garage
![Ditching MyQ for OpenGarage - Open Source Garage Door Control](https://lemmy.world/pictrs/image/9c26cb5a-2d01-44d9-8125-a1824b3ac2c7.jpeg?format=webp&thumbnail=256)
Hopefully this fits here? Its self hosted, but not quite what the usual self hosted post would be. I've not seen any real reviews of these, so I figured I'd post
Oh jeeeeez! That's what I get for copying and pasting a million times
EDIT: FIXED!
Not really, I just update containers via Portainer and update the OS with a bash script. Once every few weeks I just roll through them all, only takes 30 mins at most
So powering on and powering off will eventually be handled by a Powershell script I use to kick of the backups (More than just Borg goes into my offsite/offline backups) and the reason it gets powered off is that the external drive I connect to my desktop computer gets shared out, and sometimes Windows mixes the drive letters up, or the Share permissions get out of whack. I find that if the VM is on when its screwed up, Debian really doesn't like the mount and ends up causing some weird issues. So if I just leave it off until I have my ducks in a row with the backup drive, it all works perfectly. I guess there is also no point it in sitting there powered on 24/7, when I only do the backups monthly too
As for why its a dedicated VM, a few years ago I noticed I was constantly moving backup software, trying other solutions etc, which just doesn't work. If you change backup software every 6 months, you don't really have any real long term backups. So I decided Borg and the VM its installed on needs to stay very stable, so I settled on just throwing it in own VM. This way I never need to move it, migrate it, etc. Its always just there and it works
I have not, but now I'm going to have to!
Thanks!
Interesting, I'll admit its been a little while since I went in there. My main concern was the ability to upload files. Text I don't care about too much, but when random people start uploading files, thats a problem
Thanks! I'll check Caddy out
My last post detailed all the hardware I am running, so this post will list all the software that I run in VM's and containers. All of the following are virtual machines running on top of ESXi 7.0 U3 on three hosts. All containers are run within Virtual Machines.
![VM's and Containers I am Running - 2023](https://lemmy.world/pictrs/image/9cbaa75b-a812-4536-a7a7-4bebfd660894.jpeg?format=webp&thumbnail=256)
Last time I posted a full writeup on my lab (The before before this) there was a lot of questions on what exactly I was running at home. So here is a full writeup on everything I am running, and how you can run it too
My last post detailed all the hardware I am running, so this post will list all the software that I run in VM's and containers. All of the following are virtual machines running on top of ESXi 7.0 U3 on three hosts. All containers are run within Virtual Machines.
![VM's and Containers I am Running - 2023](https://lemmy.world/pictrs/image/2651d085-4c97-4da6-8563-c6e6dfaf7953.jpeg?format=webp&thumbnail=256)
Last time I posted a full writeup on my lab (The before before this) there was a lot of questions on what exactly I was running at home. So here is a full writeup on everything I am running, and how you can run it too
SMTP Relay Questions
I use O365 Business (Or whatever the heck they call it now) for my email, so for SMTP on all my devices at home, I use an O365 account with an app password, sending as a distro-group so it can have a custom name
This works, but I don't like how every device/server has O365 creds in it. I am thinking I should setup an SMTP Relay at home locally, which sends to O365 (Or Sendgrid, etc etc) and then SMTP on local services can just point to that local address
Is this the right way to go about it? What is the current best software do it? I've only ever had experience using IIS to do this, and of course I don't want to be running windows!
Looking for some kind of SSO/Account Management for TrueNAS
I have 2 x TrueNAS boxes, and because I am doing replication between them, I need to keep the UID's and GID's the same between them for accounts that are needed on both ends
This leads to a situation where I must great all accounts on both sides, which gets a bit annoying.
There is also situations where I need to update accounts, like my wifes account, but she has no access to TrueNAS, so I need to get to her type her password in, twice. A bit annoying
I'd love a way to have a central account repository with a self serve password changing UI so people can change their password, and have it all sync between TrueNAS. Ideally the accounts would stay on TrueNAS, so if the SSO solution dies, all the accounts stay
Does this exist?
I'm not bad, but I suspect I'm worse than a lot of guys out there
Zero problems, often times stuff in the house is actually hotter than stuff in the garage funnily enough, even in summer
Yes, I have a 27kw Natural Gas standby generator with an ATS. It takes 10 seconds from power failure, to it switching to generator power. So, the UPS just bridges that gap
In the extremely unlikely even the natural gas goes out, I have a 7.2kw Tri-fuel portable generator (Gasoline, NG and Propane) and I keep around 80 gallons of gasoline on hand, and I have an inlet and interlock on the main breaker, so I can switch to that if needed
its a Natural Gas generator, and it actually takes 10 SECONDS!
I don't know if I should be happy or sad
I have Bitwarden set to give my wife access if she requests it and I don't respond in X days
Things generally "just work" so she would have access to everything, and she can figure out what she wants to do. All the passwords are there and all of the configs are fairly easy for stuff she cares about anyway
Best I can do is my public key on the contact page!
Honestly, I'm not 100% sure. I don't have a way to monitor just the stuff in the rack as the UPS also powers a lot of other stuff in the house. Either way, I've worked to make everything fairly low power, or at least as low power as feasible. The things that use the most power is the disks
I can tell you its less than 800w though, as that's the lowest the UPS goes at night. But that also does include both me and my wifes desktops which stay on 24/7, and an Apple TV, and standby power for all devices etc
In this post I will hopefully detail my entire home network. Some of this has been in separate posts explaining single items, but nowhere do I have all of the network in one post. Here is a full shot of the rack in my house. Its in a centrally located
![My Overkill Home Network - Complete Details 2023](https://lemmy.world/pictrs/image/1cf23d0a-302b-45a1-b419-28f4f8d7521e.jpeg?format=webp&thumbnail=256)
Hopefully this is not too long! There has been a lot of changes since the last time I posted a full overview like this
At the end of 2021, I moved my blog into Linode. The main goal for this was to keep it up in case of disaster or outage at home, and utilize the much better networking of Linode. Here is the post: Moving my Blog from Home to LinodeA while ago
![Moving my Blog off of Linode and back Home (Sort of)](https://lemmy.world/pictrs/image/842089d2-19fc-4d3b-920e-f3d424a90068.jpeg?format=webp&thumbnail=256)
Well, that didn’t take very long at all! As with almost everything, the cloud seems appealing, and then slowly increased in price while the service gets reduced
At the end of 2021, I moved my blog into Linode. The main goal for this was to keep it up in case of disaster or outage at home, and utilize the much better networking of Linode. Here is the post: Moving my Blog from Home to LinodeA while ago
![Moving my Blog off of Linode and back Home (Sort of)](https://lemmy.world/pictrs/image/fe215a6e-4322-4bfe-b4ef-6c91dda00845.jpeg?format=webp&thumbnail=256)
Well, that didn't take very long at all! As with almost everything, the cloud seems appealing, and then slowly increased in price while the service gets reduced