Hey ! Sorry I didn't saw your message. I came here to explain how I solved it (just now)!
I discovered a lot of nice option in gluetun (like port forwarding)
But turns out the solution was to change the network interface in qBittorrent options from eth0 to tun0... Simple as that
Thanks for your help!
About the IPs, Is the fact that docker is not per say on the same network can influence that ?
Thanks for the response
I checked, but the issue is still there, the IPs are the same as before, as I fixed the IP of the computer on the router. The port are forwarded manually and the server is accessible from outside the network.
The limit is set to original and upload debit, limited to 11 Mbps.
I just added all the local subnetwork IP list as you said, and the option "treat IP WAN as LAN speed" was already checked.
Secure connections are set to "preferred".
Also, I'm able to access my server directly from outside through my public IP, so the forwarding should be good.
Is there a way to see if I pass through relay instead of direct local play?
Everything plays with really low quality
My computer crashed recently, and I had to reinstall everything. Since then, I could not have anything above 720p anywhere besides playing directly on the computer that runs plex.
It looks like the maximum rate is 2 Mbps regardless of the original format.
I my install is pretty much the same as before.
I run plex as a docker container on Kubuntu.
CPU : I5-4590
GPU : GeForce 1030
I installed the Nvidia toolbox for docker as well, and everything should be good
I tried activating, deactivating HW transcoding, playing with the transcoding speed option, disabled the iGPU to use only the 1030, but nothing seems to make any difference.
I first thought it was a certain format, but it seems to affect everything. I tried to optimize a file by encoding it with the plex option, but the issue stays.
I thought about a network limitation, but nothing is supposed to have changed.
I'm kind of clueless now on what to do next
Any idea on where to look?
Edit2:
Solved!
I unchecked the "use relay" option, and that fixed it.
I still have issues with certain clients, but that's another problem.
I found it odd that everything defaulted to relay when it could have direct play with certain clients.
Thank you for the help!
Yes and they are emitting a lot of light pollution. Even more than conventional lights.
I do
The last version is really nice
With sequence, multicamera, text to speach support
The support for hardware acceleration render could be better but it's getting there
Also you can't have an effect track (or at least I couldn't) which would be great
And I found the stabilization tool to be hard to use.
Other than that it's really good and allow to have a reel pro workflow, and for free !
I prefer it to Shotcut. Blender is also really nice but I think it lacks option in the video editing part. Although I didn't tried it for a long time
I do, and you're right, it was because of bracketing. I thought that this option was to set the steps of the +/- button for exposure compensation in S or A mode. I didn't think it was that, since it seems redundant with the multiple exposure option.
Anyway thanks a lot !
Shutter Speed on Lumix G85
I have trouble understanding how to set a fix shutter speed with my camera.
Once I chose a SP, my camera take the picture with the right one then if I take another one shortly after it tries to adapt the shutter speed to have more or less exposure.
Is there a way to remove this option?
For info, I tried in S and M mode, with manual ISO, manual focus, manual WB, and I made sure that the "multiple exposure" option was off in the setting menu.
Rawtherapy is really good The workflow is pretty straitforward and there's a lot of tutorials. It's really professional although it's not as easy as Lightroom.
Darktable is another good alternative but I prefer Rawtherapy
C'est comme des brochettes normales Tu peux mettre des tomates, des champignons ou ce que tu veux entre les morceaux de seitan
Aussi, tu peux faire mariner le seitan avant pour ajouter des saveurs
So it's seems to be working but all torrents are stalled for some reason
IP leaks can see their file and I can curl an IP from qflood container but somehow the torrent won't download
This is not a matter of different point of view but a moderation one, since they are outnumbered for now with flow of new people and bad actors.
I don't think they did it happily
But we're not concerned since this instance is smaller and probably not as much targeted
Thank you
So I read quickly and from what I understand I can generate a wiregard configuration file for example and provide it to this container, thus setting the network directly to the container.
Am I understanding it correctly?
Thank you
I know the option but the network interface of the vpn is not accessible by the container.
I'm trying to have this interface listed in the setting you mentioned
Link qBittorent docker container to VPN
I'm trying to link a docker container qFlood to my VPN (proton) on the host to prevent IP leaks.
When everything is on the host, I can just choose "proton0" in the network interface to use, but I don't know how to do that inside the container because this interface is not exposed to the container.
Is there a way to do that?
Or even to implement the VPN inside a container?
What the alternative to prevent IP leaks with qBit on docker?
edit:
I used gluetun + qFlood as advised and it worked like a charmed except that I could't seed or leach at all
Turns out the solution was to change the network interface in qBittorrent options from eth0 to tun0… Simple as that
Thank you all for the help!
Lemmur n'est plus maintenue d'après le github.
Jerboa est la seule que j'ai trouvé qui fonctionne mais elle est en encore en alpha.
Mais depuis la migration massive, les mises à jour sont assez fréquentes (2 dans les deux derniers jours sur Fdroid) et les fonctions devraient arriver petit à petit
Pour Mastodon j'utilise Megalodon que je trouve pas mal même si je n'y passe que peu de temps.
I use Proton and it pretty fast IMO even without port fowarding since I can't use it.
And it has special option that prevent tracking in the event of a warrant to get your IP and also a system to avoid streaming service blocking VPNs' addresses
My second point, if you're on Linux, don't expect all the options proposed. The Linux app is pretty bad for now. No port fowarding, no split tunneling. Just kill switch
They supposed to remake it eventually... but it's been a while
So I recommend it if your on windows or Mac.
With Linux it's usable but for the price, It's not good
That being said, you can apparently use openvpn app to use it with more options, but I hadn't have the time to try it yet.
The cli Proton is supposed to have more options but I couldn't make it work even by following the doc. I might be the problem on this one.
Edit: typo
Thanks, that makes sense. It grew pretty fast in a few days.
Ok I'm seeing it now. It's empty but I assume it takes time to load. Thanks!
Any Idea on why I couldn't do it myself?
That's my understanding, but I'm trying since yesterday and still no results. From Jerboa I succeeded in finding one community, but since then, it looks like I cannot even though I'm on browser right now. edit: is it possible API are overwhelmed by the number of recent requests?
I'm not sure if I'm doing it correctly, but when I search for other community on other instances, it doesn't show up in the results. I tried the complete URL, the "!", the "!" plus @instance, the name alone. Is there something special to do? Is any user can look for community?