Apparently my cousin's best friend works marketing for Squid Industries and is Lucas's gf. So they sent me some stickers and some other goodies. Thanks Ashley!

!

CobraTec Trapper with hidden release and black horn scales!

!

cross-posted from: https://lemmy.world/post/12612373

> Happy Front Flipper Friday to all who celebrate. > > Despite the fact that I tell myself I don't even really like front-flippers, they keep showing up at my house. > > A true cry for help, I think. > > Today's Front Flipper is the Ray Laconico designed, CJRB Ekko > > This version has CJRB's budget powder steel AR-RPM9, 3.25" (8.26 cm) in length with green micarta scales. The micarta is very smooth and, depending on opening method, can feel a little slippery but I've not had any real issues. > > !image > > Straight spine with a nice deep swedge ground out at the front. > > !image > > Perfectly centered out of the box with really great action. > > !image > > I like the fact that it's a sheepsfoot with a little bit of belly on it. I like the fact that you can easily spydie-flick it open (and are not forced to use the front flipper). > > !image > > It's not an out-of-this world knife but a nice solid choice. I got it used, as I do most of my knives these days, and so the price was really good. Looking forward to putting this into the EDC rotation.

cross-posted from: https://lemmy.world/post/12442733

> Here's a quick photo essay on what $9.99 will get you (currently $8.99 with coupon at amazon) from "DuraTech" > > It came in a serviceable cardboard box and not just bubble wrap or anything like that. The pocket clip provides the retention inside the box. > Added bonus inside the box: extra oil (I hope it's just oil) soaked into the cardboard: > !image > > !image > > The scales are very grippy and will probably tear up a pocket or two. > Pocket clip is pretty decent deep carry. Screws and clip are not recessed. Right side-only. Also, I'll need to get another photo of it but the clip has a lateral bend in it that parallels the shape of the scales. Very odd looking. > > !image > > !image > > Centering was slightly off but not bad (my photo is also off so it over-emphasizes the angle) > > !image > > Grind is really good for a $10 knife. Even on both sides, no issues. 8CR13MOV steel but unknown hardness so we'll see how it holds up. Here it is with it's little protective sheath out of the box. > > !image > > > Everything was looking good but, of course, there is a catch. It is, after all, a $10 knife. > Probably the worst detent I've ever seen. Getting the detent ball out of the hole gives you a click loud enough to be heard in the next room. I may have to try and capture it on video. The knife is almost impossible to open with the flipper tab and completely impossible to open with the thumb studs. Even if the detent was dialed in, the thumb studs are almost useless given how close they are to the scales. I might remove them entirely. > > So, if you'd like a knife with a flipper tab and thumb studs that is actually two-hand open, this may be the knife for you!

best knife review for<u>ever</u> 😁

cross-posted from: https://lemmy.world/post/11313739

> I'm trying to remember if this was my first button lock knife. If it wasn't the first it was darn close. > Picked up a used Civivi Altus back in June. I carried it for most of June but then had set it aside for other things. > > In December I picked it up again after using it to improve my sharpening skills and it's been in my pocket, for the most part, ever since. > > !image > > I have to apologize in advance for the low quality of the photos here. After dropping my phone through the ice while ice fishing recently I had to settle for a lesser phone with much lower camera quality. > > Maybe if I had not purchased so many knives in 2023 I could afford a better phone? Such talk is madness and we will never think like that again. > > !image > > The Altus, right out of the box, was a good fit in my hand. Handle length and shape is good and, while it appears a little boxy, doesn't feel that way. > > The one issue I had was the pocket clip sat in a weird spot in my palm. So, this seemed like a good excuse to try out one of the replacement titanium clips that Civivi offers and it has made a world of difference. > > !image > > I can't even notice it's there anymore. > > The trade-off with the titanium clip is that it is no longer deep carry. But it's close enough and the way the back of the handle is shaped, it doesn't show up in your pocket in a very noticeable way. > > The blade is 2.9" (7.37 cm) Nitro-V steel which, near as I can tell, is very similar to 14C28N. It's been a great steel for the money and takes a nice edge (as far as I my so-so sharpening skills are concerned). I've not had to sharpen it since but have stropped it several times. The flat grind is good but I do wish it had a bit of a hollow grind as food prep is not nearly as fun as with my classic Elementum. > > !image > > The button lock on this has been fantastic. No issues at all (though again it was used so probably already worked in a bit) with lock-stick or weird deployment. Detent is well tuned as well and the drop-shut and flip open with the button is flawless. It makes a satisfying-sounding click in both directions. > > !image > > It is not a small knife but it is not a large knife either. Even with the G10 scales and internal milling it somehow feels a bit heavier than similarly sized knives but it sits nicely at 3.11 oz. (88.3 g). > > !image > > No comparison photos against other knives today, sorry. > > Overall: > If you like the blade shape and want to experience a good button lock, I recommend it. I've used it for food prep, fire prep (feathersticking pieces of fatwood), opening 40lb bags of bird seed, on plenty of boxes and zip-ties with excellent results. The only real issue with food prep is the same for every flat-ground knife: not as efficient a slicer. The other thing I'd mention is that current prices are at ~$73 US which feels too high. Maybe catch a sale or buy one used if you can. >

recently got this knife as a gift and it's my first Damascus steel.

i am never happy with the edge, it has teeth, it doesn't glide. fine when cutting bread but awful for an apple :/

is that normal for damascus?

cross-posted from: https://lemmy.world/post/10804245

> What is up knife community! It's been a while, what with the chaos of the holidays, and then the chaos of work after the holidays and etc., etc. > > I picked up a few knives over the holidays, some for the kids, some for me. The first of which is this KNAFS Lander 2! > > For those who do not know, KNAFS was started by Ben Peterson, a former BladeHQ marketing/YouTuber/designer/other things guy. He first collaborated with WE/Civivi on the Banter and Baby Banter series of knives. (See previous post on one Baby Banter variant here > > Ben was famous for his long drawn-out catch phrase "What Is Up Guys?!" that he would start all the BHQ videos with. > > Fast forward a few years and Ben left BHQ and started his own knife company with a couple of his own designs. The first was (not surprisingly) the Lander. > > The Lander is an interesting platform because it was designed, from go, to be something you could easily swap scales on. The knife does not have to be completely dissembled in order to change its appearance. And, amazingly, Ben released the detailed specs of the Lander scales, free, to the internet. If you have a 3D printer (or access to one) you can download the complete STL or STP files and print your own. > > The original Lander is a liner lock and either D2 or 14C28N steel and OEM'd by QSP. > > As is the way of things in the knife world, one Lander is not enough. And so, the Lander 2 was released in November 2023. > > Using Keizer as the OEM, the Lander 2 is a crossbar locking knife with an S35VN blade. (Keizer calls their lock the Clutch Lock) which has 5 different adjustable points for both sets of springs on the lock, meaning you can adjust the spring tension simply by moving where it connects to the liners. > > !image > > So we have a knife that is provides user-friendly customization in looks and in action. > > Here it is in comparison to a couple other knives, first the Kershaw Heist (another crossbar lock discussed recently) > > !image > > Similar in length but the Heist has a much thinner blade and is slightly thinner in body and lighter. > > Here it is compared to a classic: the Civivi Elementum. This has been my user for some time now and the D2 has a slight patina but is blemish free for the most part. (Tape residue not withstanding) > > !image > > I was losing the evening light, so I only got one image of the Lander 2 closed. > > !image > > Usage so far: > Pretty limited use by me since I got it. Mostly because I've been using other knives that I also picked up. This Lander 2 was used but barely so. I had to clean up the scales a bit and stropped the blade but other than that it looks brand new. > > I buy used knives almost exclusively these days as the discounts can be quite good. > > The action on the Clutch Lock is really really good. Buttery smooth right out of the box. But then again, it was used so the previous owner may have flipped it a lot? I'm not going to complain because it's really nice. > > The thumbstuds and crossbar studs are well made and do not bite into the hand. The shape of the handle is, for my hand size, nicely formed. What use I've put it through has been pleasant. I wish the Lander 2 had a hollow grind instead of a flat grind but the slicing has been fine even without. > > I didn't have it handy for photos but it reminds me a lot of the first version of the Civivi Elementum button lock (the one where the button was only method of deployment). > > Because the knife was just released, there are not many 3rd party options for scales. A few have started showing up on Etsy that I've seen, so hopefully more soon. > > Overall verdict: The crossbar lock (adjustable) and open format of the scales (awesome) makes this a very compelling choice. I would not have paid full retail price for it though, as there are a lot of other S35VN knives out there for much less. But if 3D printing or just having a lot of choice for how your knife looks is your thing, it's hard to find an easier solution than the Lander series. >

cross-posted from: https://lemmy.world/post/9936120

> That's right, I've been at it again. > > (And if you want to fast forward through all the foreplay and get right to the action you can download the models package here. Merry Christmas, ya filthy animals.) > > ! > > Here's a slightly more practical printable than the last one, which I'm calling the Sparrow. > > This knife has the same design goals as before: Fully printable, with no external hardware except the Stanley utility knife blade, no supports, and mechanically as close to a real functional mechanism as is possible. > > ! > > ! > > So it's a real working lockback folder. It locks up pretty good, too. Getting that working was one of those things that sounded really simple conceptually but actually turned out to be a pain in the ass to achieve. The mechanism owes a bit of credit to the Secret Of Show Business, via the wooden Spyderco kit we looked at a while back. > > Oh, and making it in orange gives the the opportunity to do one of them there themed gear flat-lays that are so popular with the influencers nowadays. > > ! > > The Sparrow is a pretty pocketable EDC size at about 3-5/8" long when closed. It's noticeably shorter than my CQC-6K, but it's longer than a Gerber EAB because I can't cheat and use smaller diameter steel screws. A noticeable portion of its length at the tail end is just to accommodate the printed screw, which I can't make much thinner if I'd like it to continue to, you know, work. > > ! > > Of course, it has a reversible pocket clip available as well. > > ! > > Sure, it's not as much fun to fiddle around with as a balisong knife. But I find the simple folding design a lot more practical for daily use. (I've been beating the shit out of my prototype, as is tradition, for a whole week at work before considering it "done.") Plus it's much less likely to draw the ire of the local constabulary if you happen to live in one of those countries with an unfortunate deficiency of bald eagles. > > ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ > > Preemptive Burning Questions That Would Otherwise Inevitably Appear In The Comments > > Q: Why are all the screws and pins separate parts? Don't you know you could simplify the design by making it all one solid lump? > > Of course I know that. However, let's say you manage to break one of those titchy little 2mm pins. Would you rather re-print the entire monolithic handle liner assembly, or one 0.3 gram pin? > > Q: But also making the handle scales separate was still totally pointless, right? > > Sure, except this allows me to make a variety of scale styles available, including zooty skeletonized ones you can print in a complimentary color for two-tone aesthetics: > > ! > > The possibilities practically suggest themselves. > > Q: This is going to break instantly and you'll slice your fingers off. Printing something like this is so unsafe! I know this because I have done no math or testing whatsoever, but am an armchair expert! > > Well, I clamped my prototype knife in my vise and yanked on it against its opening axis with a dial scale until it broke. You know, for science. > > The major markings on that scale are 5 pound increments, by the way. It gave a noticeable warning creak at 37 pounds, and finally broke with the dial indicating 39 pounds. It was only made out of ordinary PLA. As you can see, I actually had to adjust my grip and I was bracing my foot against the bottom of my workbench to be able to put enough oomph into it to break it. If you torque your box cutter at nearly 40 pounds in day-to-day use I suggest you're probably using it wrong. Provided you don't try to use this knife as a crowbar or a piton I really don't think you'll have anything to worry about. > > Q: What's with the dumb bird on everything? > > He's a penguin. Don't be dissing my penguin, man. > > ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ > > .STL Files Download: Here. > > As before, the above is provided as-is and with no guarantees, and you are free to make your own or give printed knives away to friends or family or what have you, but prints of my models are not to be sold and not to be uploaded or reposted to any model repository or anywhere else outside of the Lemmy-sphere. > > ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓ > > Assembly Instructions and like a million pictures As Follows: > > People with no interest in printing or assembling one of these can stop reading now. I promise I'll go back to my usual program of loquacious show-and-tell/point-and-laugh over various whackmobile novelty knives in my subsequent posts. > > Anyway, you will need to print this small mountain of components. > > ! > > The complete bill of materials is as follows: > > - 1x Blade Holder > - 1x Top Liner, 1x Bottom Liner > - 1x Lock Bar > - 1x Spring Block > - 2x Female Screws > - 2x Male Screws > - 2x 2mm Pins > - 1x 4mm Pin > - 1x Top Scale, 1x Bottom Scale of your choice > - If you want to use the clip, you need 1x Pocket Clip, and replace 1x of the short female screws with the longer one included, labeled "for pocket clip." > > Several components are quite close fits, and various pins and screws need to fit through their respective holes. If your printer produces parts with a lot of elephant's foot on the bottom you'll probably have to trim the inside edges of the holes with a utility knife blade, which is something I should hope you'll have to hand when embarking on this project... > > Start with the bottom liner. You can identify it as the one with the chamfered holes for the pins, which you'll notice have flared heads. > > ! > > Stick the 2mm pins and the 4mm pin through. They'll sit flush with the underside of the liner. If they don't, you have some trimming to do. Then sandwich your bottom handle scale underneath that. The scale will keep the pins from falling out. > > ! > > Then identify your screws. There are two screw lengths, and if you're going to use the pocket clip you'll put the shorter one through the front where the blade goes on, and the longer one through the tail where the clip will go. If you're not going to use the clip, just employ two short screws instead, one on either end. > > ! > > Either way, stick the female screws up through the entire sandwich. > > ! > > Drop the blade holder on the front screw. > > ! > > Then put the lock bar through the middle pin. Play with it a bit and make sure it drops cleanly into the notch on the blade holder. If anything is going to require tuning or sanding it'll be the interface between the lock bar and its notch there. It should also pivot freely on its pin. If it's a really tight draggy fit this will annoy you, and this'll make the lockup unreliable as well. > > ! > > The spring block goes on next, and obviously the holes on it are for your last remaining pin plus the screw at the tail end of the knife. The prong on it goes below the end of the lock bar, i.e. on the inside. When you press the hump on the lock bar it should spring up and down satisfactorily. > > ! > > Then the top liner goes on. All three pins should rest home in the holes in it. > > ! > > Then the top scale and its (male) screw. You can drive the screws with a penny if you're too perverse to use a screwdriver. > > ! > > If you're going to use the pocket clip, decide which side you want it on (of course it's reversible; I'm not an animal) and stick it through the slot on the tail end of the knife. > > ! > > For strength, I recommend putting the female side of the tail screw through the clip, then through the rest of the assembly, and then put the male screw on the side that's not holding the clip. Depending on which side you chose to put the clip on you may have to take it out and stick it through from the other side. > > FYI, if you don't use the pocket clip there is a hole in its mounting slot you can use to tie a lanyard through instead, if you're into that sort of thing. > > ! > > The blade slides in from the front and rides in a track that holds it on both the sharp edge and the blunt spine. Press the blade locking pin flexture down to get the pins to clear. > > ! > > The pins ought to click into the two notches on your blade quite nicely. If you noticed that this is the same blade holding mechanism is very similar to the one on my last knife, that's because you're right and it's exactly the same. > > ! > > Fin.

cross-posted from: https://lemmy.world/post/9725583

> (dear gods... what have I done? ) > > Some of you may remember my Weird Knife Wednesday post from a few months ago about the 2022 Walmart crossbar lock (hilariously called "shaft lock") knife. It was a first for Ozark Trail. Here's a link: https://lemmy.world/post/5850196 > > That knife came out of nowhere and many of the budget-oriented knife communities took notice. If your local Walmart had them, it wasn't for long because they were selling out. I bought 2 (and gave one away as a part of a white elephant gift). > > Skip to 2023 and Walmart has released not one, not two, but three different crossbar locking knives for this holiday season. (more on that later). > > For those who don't know, Ozark Trail is the Walmart in-house brand (the Amazon Essentials of the brick and mortar world) for many, many things. Including knives. > > For $5-6 US, these are knives built to a very specific price point and it shows. > > Enough talk, time for some photos: > > !image > > As mentioned these are 2 of the 3 released this year for the holidays. You'll find these two, along with a few liner lock, frame lock, and fixed blades, in an end-cap or center-aisle display if your Walmart has them in. > > !image > > The textured G10 (?) one at the top looks suspiciously like the Sencut Scepter (which, is par for the course for Ozark Trail "designers"). The second one, with the blue pivot ring does not look familiar but I'm assuming eagle-eyed readers know its inspiration. > > !image > > It's hard to see in these photos both knives have deep-carry clips that extend past the back of the scales. These are very deep carry indeed. > > The action on these knives is really bad. As if straight out of the factory they decided to take them to the beach and bury them all in sand before shipping them off. The crossbar on both grinds against the back of the knife. The spring tension on the bar is not as strong as last years model but could still use some work. I'm sure that they will break in, even if it takes a year. You can't really flip them open (without also throwing your wrist around wildly and looking like a lunatic) and you're mostly going to have to 2-hand shut them. > > On the other hand: these were $5 each. So if you have to slow-roll them open, maybe that's not so bad? > > I had mentioned a 3rd "shaft lock" knife that seems to be mostly available online, though I did find a few stores listing them as in stock (but I'm not driving further than I already have for these). It comes as a part of a 3-pack of knives and some other tools. > > I'm blatantly lifting this image off the Walmart website: > > !image > > I don't think I'm going to buy the pack though because, while only $5 each, buying a couple of these gets me into "real" knife territory (the aforementioned Sencut Scepter being a great knife for the money) and I'd rather buy more of those than more of these. > > Should you buy these Ozark Trail knives? I would hope not. I made this sacrifice for you. Don't repeat my mistakes, learn from them.

cross-posted from: https://lemmy.world/post/9608937

> NKD (well, week): The Kershaw Heist > > This knife is a steal. There I said it. It's done. We can move on. No more puns from here on out. 😆 > > Earlier this year, Kershaw released their first crossbar locking knives. It would appear that the runaway winner of the 4 was the Iridium. It showed up in many reviews winning a lot of praise, and likely for good reasons. Kershaw knows how to build knives well and they appear to have knocked it out of the park with their version of the crossbar, which they call the "Duralock." > > The Iridum is not really a knife for me though. With only a few exceptions, I'm not really into knives with scales made of metal. Too cold in the winter and too slippery in the summer. > > When I saw the Heist, however... > > !image > > IMHO, the Heist is what you get when you take a Benchmade Bugout and a Benchmade Freek and make a functional baby at 1/3 the cost. Hashtag KnifeBaby > > !image > > !image > > I don't have a full-sized Freek, just the old-school Mini Freek but the comparison works, I think. > > First off, the Heist is thin. As thin as the Bugout. Lightweight handles, but full-length liners so slightly heavier than the Bugout. The blade itself is far thinner than the Freek and thinner than even the Bugout thanks to the deeper swedge. So this is a very slicey knife indeed. > > !image > > This is not a knife I would expect to be using for hours on end. Much like the Bugout, it's function is all about having a knife in the moment for quick needs without weighting you down. This is a knife I would not have a problem camping/hiking with at all. > > !image) > > Out of the box the knife did need a little breaking in. The action was a little slow but after a week of just handling it, it's just fine. The blade steel is D2 which helps keep the costs down. Kershaw is not a super budget brand though so at $50 it's on the higher end of D2 knives these days. > > Pocket clip is great with the right amount of deep-carry for me. Scales are grippy but not aggressively so, and I don't feel like it's going to tear up the pocket. > > Based on a week's worth of use, I would highly recommend this. The Duralock is well tuned, the knife sits in the hand comfortably for what it is, it's light, and best of all: it's not super expensive. > > !image >

cross-posted from: https://lemmy.world/post/9496597

> I had posted on a FFF (Front Flipper Friday) that one of my go-to office carry knives was the CJRB Malieah. A great 5th pocket carry that is not worrisome to non-knife people and fits within the 2.5" blade length limit of the city where the company office resides. > > I think the CJRB has been replace by the Civivi Baby Banter. At least, it seems to have been for the past 6 ot 7 visits. > > !image > > The Baby Banter is even less worrisome to non-knife folks (some have said it is "cute" which I'm sure it bristles at). > > !image > > The knife is my go-to for food slicing at work and (once cleaned) boxes, tape, or as in today: velcro cable straps so I could jerry-rigg a second wireless lavaliere mic receiver to a small video camera. > > !image > > It's small and unassuming but has performed really well. If you're looking for a knife with those properties on the budget side, I highly recommend it. > > !image >

cross-posted from: https://lemmy.world/post/9305807

> A day late and a dollar short as they say. So much for "Thursday." I tried to get this post up yesterday but the fates were against me. > > I admit this is a bit of a stretch for Throw Back Thursday because I'm old and 2011 was, near as I can tell, last week. > > At least I think 2011 is the right year because my Google-fu is weak today. > > !image > > The CRKT Drifter has come in 2 major varients: G10 scales with a liner lock and stainless steel scales with a frame lock. I think this was introduced in 2011 but that could also be the liner lock version. If someone wants to correct me, operators are standing by. > > !image > > This is one of only 2 frame locks I own and also one of only 2 combo blades I own. I own a lot of knives, so this might give you some indication as to what I think of frame locks and half-serrations... > Edit: I just remembered that I have 3 other frame locks. So, I'm a complete idiot. > > This knife was purchased in 2019 which was yesterday near as I can tell. It was a very early knife purchase and I had not yet figured out what I did and did not like. Another huge factor was the fact that BladeHQ was basically giving this away in the discontinued section for $15. > > !image > > Aesthetically this is a good looking knife (IMHO). The matte grey and smooth lines go well with the polished blade. However, the reason the lines are smooth is because the pocket clip is single position, tip-down. The horror...the horror. > > !image > > But, there's actually a clever trick here: the pocket clip also serves as the overtravel stop for the frame lock! Now, me not being a frame lock guy, maybe I'm just ignorant here, but that's not something I remember seeing on other knives. This photo is not of great quality due to the lighting I had to work with but you get the idea I think. So while it takes 3 screws to hold the clip down and while it's sort of obnoxious looking, it's also functional and I can respect that. > > !image > > The combo blade, I figured out fairly quickly, is not for me. Give me a knife with full serrations or give me a plain edge blade but not both. It will fail to meet my needs for most things. But thankfully it only took $15 to sort that out. > > !image > > If it's not for you, why keep it you ask? Well because it does remind me of the journey this silly hobby has taken me on but also because I don't get rid of anything and in all likelihood the authorities will find my body buried under a mountain of knife boxes years from now. So what's one more?

cross-posted from: https://lemmy.world/post/9193980

> I'm going to go out on a limb and assume you've all seen this. > > Do you want one for yourself? I assume you do, because you clicked on this. Well, here's the deal: In order to spread some Ninja Cheer (and to do what I think the cool kiddos are calling "drive engagement") I'm going to give away one each of these three colorways of my Harrier Utili-Song: > > ! > > Here's all you have to do: Post yer durn knives to this community, and talk about them. That's it. > > High effort, low effort, what you post and how much you post does not matter. Any user who makes an actual on-topic contribution to this community between right now at this very minute and December 15th will be put on the list, and I will pick three winners from that list at complete random. > > I'll pick one at a time and whoever wins first can pick their choice of design, the second winner can choose from the two that are left, and the last poor bastard gets what's left over. If nobody posts, I'll keep all three of them for myself. See if I care. > > Or who knows, maybe someone this will decide this is against the rules and we'll all get banned. But I read the entire ToS and I don't see anything prohibiting this, so let's roll them dice! > > The Fine Print > > I'm opening this to US residents only because I'm not made out of friggin' money and shipping stuff all overseas and everywhere will probably bankrupt me. Plus, it's likely that anywhere outside of here in Freedom Land, you'll find it's illegal to import a balisong or balisong-like-object anyway. Winners must attest that they are at least 18 years of age, and it is your responsibility to determine whether or not a balisong is a legal object to possess where you live; that's not my problem. Also, I will ship these without blades included. You'll have to provide your own. > > Winners must agree that I take responsibility for nothing. Offer has no cash value and you can't sue me for anything. What you get is what you get, and if your Harrier lasts you a thousand years or breaks instantly makes no difference to me because I'm not going to do anything about it either way. Winners further agree to hold me harmless for any event or condition which may transpire in any manner subsequent to receiving the aforementioned item. If you don't agree, you can sod off and I'll pick someone else in your place.

cross-posted from: https://lemmy.world/post/9160400

> cross-posted from: https://lemmy.world/post/9035683 > > > And you'll never guess what kind of knife it is. Go on. > > > > ... > > > > Yes, of course it's a balisong box cutter. Because it just is. > > > > Update: And the .STL files are released! Get them here, along with assembly instructions, and other sundry bumf. > > > > ! > > > > Okay, so it's not exactly an exciting custom collaboration with a big name manufacturer made out of a supersteel with rich exotic handle materials in a fancy matte box. That would require being considerably more involved with the industry than I am. Which is not at all. > > > > Rather, this is a 3D printable utility/fiddle toy that's ripped off from just a smidge inspired by the Gerber EAB we were talking about the other day. Why doesn't anyone make a flipper like that? > > > > So as our resident balisong expert, I just had to ask myself the other day just how hard developing a working balisong knife could be. > > > > ! > > > > The answer is more than you'd think at first blush. I'm not at all ashamed to report that the production and assembly of one of these takes no less than 26 individual components if you include... > > > > ! > > > > ...The optional but fully functional pocket clip. > > > > And yes, it even has a fancy kickerless design with "zen" pins like your big dollar brand name balisong model. > > > > "But does it actually work?" I hear you cry. > > > > ! > > > > You're damn skippy it does. > > > > My design goals were: 1) Make a functional balisong knife that 2) is completely 3D printable without reliance on outside hardware -- other than the blade, obviously -- that 3) plays to the strengths and avoids as much as possible the weaknesses of filament deposition printing and 4) does not require using any supports. > > > > (And yes, you could print the blade, too. If you wanted it to be laughably ineffective.) > > > > ! > > > > Even the assembly hardware is 3D printed, and you can install it using nothing but a penny. > > > > ! > > > > I know you all have been holding your breath until I posted this picture. There you go. You can breathe out now. > > > > Oh, and also: Would you like to use this as a fidget toy that won't get you in too much trouble in polite company, or at the office, or in some backwater hellhole where balisong knives are illegal? > > > > ! > > > > You're in luck. Because there's a blunt trainer blade for it, too. > > > > The Burning Questions I Know You're Going To Ask: > > > > Q: What are the sizes and weights? > > > > 42.1 grams. 1.48 ounces. This thing is the second lightest balisong knife I currently own. I designed it in metric, but in keeping with tradition around here it is almost exactly 5" long when closed, 7-1/2" long open (with a typical Stanley style blade installed), 1-1/8" of usable blade edge, and 5/8" of an inch thick (not including the pocket clip, which you can leave off). > > > > Q: That's very funny, but the tolerances on this plastic piece of shit are terrible, right? What does the wiggle test look like, smart guy? > > > > ! > > > > Bam. Stick that in your pipe and smoke it. > > > > Q: But, it's made out of plastic. Isn't it going to break or erode into nothing, like, instantly? > > > > I've been messing around with the above pictured example for about a week now and I've probably flipped it somewhere between six thousand and a zillion times by now. I've been using it to cut up boxes at work all week, too. It's as perfect as the day I minted it. > > > > Q: Isn't cold creep in the PLA going to turn it into a banana eventually? > > > > Maybe! Probably! We're sure as hell going to find out. > > > > Q: Are you going to sell these or something? > > > > I'm not ruling it out, but that wasn't my goal here. I might give a couple away at some point, though. > > > > Q: Then can you shut up and give us the fucking STL files already? > > > > Soon. In order to prevent this post from being longer than it already is, I'm going to release the files and assembly instructions separately. After I'm good and satisfied the design is well tuned enough to inflict upon the unwashed masses, anyway.

N690, micarta

cross-posted from: https://lemmy.world/post/8072598

> Happy Front Flipper Friday to all who celebrate! Today is also a NKD* for me with the recent arrival of the Civivi Appalachian Drifter II. > > The lineage of the Appalachian Drifter family is intersting as there have been a number of variations. A slip-joint version in S35VN, a liner locking version in S35VN, various damascus versions, and this, the Nitro-V version. All, as far as I know, are now discontinued by Civivi and most places are offering remaining stock with pretty good discounts. > > !image > > This has an odd-ball pocket clip: it's curved and has a triangular mount that is not compatible with any other Civivi knife that I've seen. (I'm not a We/Civivi/Sencut expert though so don't hold me to that.) > > !image > > This might be only the second folding knife I own with a clip-point blade, which seems odd, as I like the blade shape. The original slip-joint has a traditional pocket knife feel/look to it and the Drifter II continues that albeit with more modern materials. > > !image > > In-hand this feels, for me, pretty good. My hand fits well inside the curve of the scales and I don't get an hotspot with the clip. The deployment, on my copy, has been a little hit-or-miss. Maybe that's user error or maybe there's some weirdness going on but sometimes it flips out beautifully and sometimes it stops half-way. It might just need a disassembly and cleaning though. The jimping on the flipper is not rough and doesn't tear up your thumb. In theory you should also be able to deploy it by way of flipping with the fuller but I can't do that with mine. That's probably all user error though. > > The micarta is not overly smooth, which is my preference. I know some complain about the Civivi micarta but I would rather have more traction than less and have never had any issues. > > !image > > This rides close to the "gentleman carry" category for me and while I would not put it through hard use there's nothing to indicate it couldn't handle it. The hollow-ground blade is thin and elegant while the Nitro-V steel gives plenty of toughness. > > For the deeply discounted price I paid, I think it's a great purchase. A nod to a classic looking folder with a modern twist. > > > (* I actually got this last Friday but as I was heading out of town to go camping in the cold, I didn't have time to even really look at the knife. )

cross-posted from: https://lemmy.world/post/7028413

> My previous two Throwback Thursday knives have been related to my time in the BSA as a Scout. Today's is no exception. > > !image > > The Craftsman medium Stockman pattern, near as I can tell, was made by either Camillus or by Schrade for Sears. This one happens to be model 95223. I've not found any correlation between model numbers and manufacturing dates but that's ok in this case because I know the year this was made. > > !image > > This knife was a gift from my maternal grandmother on a special day: the day I became an Eagle Scout. She had it engraved with the date, something you can just about see in the main photo. > > !image > > It was always my grandmother's intent that the knife be used as a knife and not as just a gift. I was (and am) very proud of it and I have a fond memory of receiving it from her. > > But unfortunately wear and tear was affecting the visibility of the engraving. I did not want to lose this, nor do I want to try and have the engraving deepened, So it has been sitting in a box for a long while. A few rust spots developed and it needs a bit of a cleaning and sharpening. > > !image > > I'm kinda tired of it sitting unseen so I think a shadow box is in order this weekend. It gave a lot of service but hiding it away is not honoring the gift nor the giver. >

This one's been with me for 11 years now and it will likely be sharp long after I'm not.

Here, I had just gone through a bunch of stuff for a big batch of chili. The acidic juices from the tomatoes etched it quickly, but any sort of patina never stays after splitting a few logs.

It's big and heavy, but it's my goto around the yard and car camping.

This is my most used big knife, what's yours?

cross-posted from: https://lemmy.world/post/6401921

> It's that time of the week: Front Flipper Friday! > > Here is the original Swaggs designed Malieah. This one is a White Mountain Knives exclusive in red micarta. It is a small knife (smaller than I realized to be honest) but turns out it's a fantastic 5th pocket carry. The action is very smooth and the front flip easy. When it arrived the micarta was a little rough but it's smoothed out and is great now. > > When I have to go into the office I carry either this or the Baby Banter due to local blade length laws. > > This about does it for front flippers for me (for now at least). Curious if anyone else has a favorite of their own? > > !image > > !image > > !image >

cross-posted from: https://lemmy.world/post/6351555

> Previously I posted about my first knife, which I received as a Cub Scout. (See link) > > Here now is my second pocket knife: my Boy Scout knife. > > This one has seen a lot more use, a lot more re-sharpening on whetstones, and has lived a good life. I remember when my dad got me the quick-release key chain which let me attach the knife to a belt loop for much easier access. I'm considering leaving the rust/patina alone as it does tell more of the history of the knife, but it could use a good dusting/cleaning. > > In addition to all the monthly campouts, I took this knife with me to Philmont Scout Ranch in New Mexico and later to part of the Appalachian Trail (Maryland/Pennsylvania border). > > It's been stashed away since I aged-out of Scouts as a youth and since re-joining as an adult leader, I've been carrying more modern locking knives, but this still has a special place in the collection. > > !image > > !image > > !image > > !image

cross-posted from: https://lemmy.world/post/6227971

> New Knife Day! (Technically a few days behind but it was a busy weekend!) > > My first SOG arrived over the weekend. The Terminus XR in S35VN. Used knife but basically brand new, and the price was good. > > !image > > > Action is great! The flipper deploy is "slow" feeling but very very smooth with a nice lock up. The shape of the crossbar lock thumb/finger ramps (?) (buttons? what do you call those?) are great. A world of difference compared to the Hogue Ritter that's for sure. > > > The grooves in the scales make for a lot of grip against the pocket so I expect this to shred the pants a bit. > > > !image > > (Ignore the weird color on the blade in the last photo, it was an odd reflection that I couldn't get rid of at the photographed angle.) > >

cross-posted from: https://lemmy.world/post/5850196

> I don't really have any more Weird Knives for WKW, but I guess you could consider this knife weird in that it somehow exists. > > For those not familiar, last December, Walmart released a $6 axis lock knife. It doesn't really have a name, though there's a model number somewhere (it doesn't really matter). They were initially very difficult to find by me, with 2 stores in reasonable driving distance not having any. However, we eventually got them in and I snagged 2. > > > !image > > > The steel is some sort of 420(x) that Walmart uses on all their Ozark Trail knives. The grinds somehow....good despite the likely accidental recurve. The action on both was exactly what you'd expect out of a $6 knife. And yet...and yet they both improved. The spring tension is off the charts. It requires a ton of force to pull the lock bar back, but once done, you can flip the knife out and most of the time flip it back closed again. I never tried to disassemble it because I had heard that the screws strip if you even show them a torx bit let alone try and use one. > > > !image > > > I gave one away in a white elephant gift exchange at a Scout meeting shortly after buying it. The other I've kept sitting on my desk at the home office just flipping it back and forth and watching the action get better over time. > > > !image > > > I've not seen them for sale since and I have no idea if Walmart will ever make another. So not a weird knife in the physical sense, more a weird knife because it defies reality. > > !image >

CPM 15V details: Please Tell Me About 15V

cross-posted from: https://lemmy.world/post/5522150

> Happy FFF to all who celebrate! Today's knife is the first purple knife I purchased: the Civivi Lazar. > > One of Elijah Isham's more reserved designs, it can only be opened either two-handed and gripping the blade or by way of the front-flipper. > > Thankfully the flipping action is excellent and the jimping not aggressive so it doesn't tear up your thumb. > > !image > > Flickr > > !image > > Flickr > > !image > > Flickr >

cross-posted from: https://lemmy.world/post/5073067

> The post by @[email protected] got me thinking about knives I've had for a while. > > This is my first knife, older than I care to discuss, that I had as a Cub Scout. I had thought it lost forever until we moved in Nov 2021 when I found it in a box. > > Still in surprisingly good shape and the backspring in decent working order. Needs a sharpening but other than that, I could give this to a Cub Scout today. (Being a knife guy all my kids already have Scout knives so, I can keep this one for me.) > > How about you? Do you have any knives from when you were a kid? >

cross-posted from: https://lemmy.world/post/4992674

> Continuing on the theme of odd-ball multi-tools I give you the Gerber Curve. (Presented with a Dime for scale because I think I'm more funny than I actually am). > > Highlights include: > > - locking! > - 7 tools if you count 2 different patterns on the file (both patterns not pictured) > - 8 tools if you think you can use the small flat-head also as an awl (which is a bit of a stretch) > - bottle icon in case you didn't know what to do with the other end. > - spring-loaded retainer > - speed holes! > - fits inside the blade length of a Benchmade Bugout > > !image > > Flickr > > !image > > Flickr > > !image > > Flickr > > !image > > Flickr > >

cross-posted from: https://lemmy.world/post/4671914

> For FFF (and possibly a late candidate for Weird Knife Wednesday) I give you the Swaggs designed Rosecraft Blades - Pocket Monster - aka the Sulley. Name and colors inspired by Monsters Inc. this knife answers the question: "But what if more choil??" > > !image > > > !image > > > !image > > !image

cross-posted from: https://lemmy.world/post/4510867

> I had heard the Kershaw Iridium was a big seller but I don't know anyone that purchased one. For me the Iridium is a little too big/heavy but the Heist looks interesting. That blade shape is very reminiscent of the Benchmade Mini Freek but I think most people are comparing it to the Bugout due to the weight/FRN scales. > > Just wondering if anyone here has any of the Kershaw's with the axis-style lock and if so, what's your opinion been on how it feels and how reliable it has been, etc. > > The other two that were released didn't get nearly as much press from what I can see are the Covalent and the Monitor.

cross-posted from: https://lemmy.world/post/4256776

> If you buy a knife with as weird a name as Squidward, then you should probably get it in a color like purple. So that's just what I did. > > Kizer tuned this one right. The jimping is not aggressive so you can fidget flip it without tearing up your thumb. Smooth action and it drops shut. 154CM steel. This is a fun carry. > > My only real complaint is the pocket clip looks way out of place for this size/style of knife. I need to find something thinner/smaller and replace it. > > !image > > Flickr > > !image > > Flickr > > !image > > Flickr >

cross-posted from: https://lemmy.world/post/4138363

> @[email protected] suggested we have a Weird Knife Wednesday. > > (This should be for fun so please don't yuck anyone's weird. ) > > Turns out, I don't have too many "weird" knives. But here's a weird multitool. > > I have no idea where it came from. It was gifted to me, possibly as a silly holiday stocking gift. > > !image > > Flickr link > > !image > > Flickr link > > The hammer/pliers (pliemmers?) actually have a spring that sorta works. And also a tiny wire cutter in case you find yourself needing to cut, I don't know, maybe 28 gauge wire? > > Knife blade and combo-flat head/cap lifter really round out this tool set. The key ring is standard size for a sense of scale. > > Just amazing.

cross-posted from: https://lemmy.world/post/3825813

> I have no idea if Front Flipper Friday is a thing but here's the front-flipping Petrified Fish Mini Beluga with Gmascus scales.

cross-posted from: https://lemmy.world/post/3750029

> For those in the US, today is National Knife Day! Happy slicing to all! To celebrate I'm carrying the first Benchmade I ever bought, the Mini Griptilian from the first year they offered it in S30V. >

To me, the Rat 2 is a great example of a "gateway" knife. Something you can give as a gift or point people to as a way of saying "hey, there's more out there than cheap gas station knives that actually work!" The squared-off spine, while not comfortable for whittling, is sure useful in fire building and fire starting (and you can always round off part of it, if you'd like).

Nothing new here, for sure, just a post of appreciation for one of my first "real" knives I purchased.

This little guy does more cutting than any other knife I own. The thick fob and copper bead give it a bit of weighting in the back of the palm -- good for a small work knife, helps keep it in your hand -- and the fob also gives extra grip when necessary for when you're using a three finger knife for a four finger job :) . Easy to keep sharp with a strop and a little aluminum rouge, and the 17 DPS bevel gives a good blend of sharpness and resilience.

! !

For those of you who know Kunwu knives, it turns out that Ironfly is their budget line and they're reintroducing it to the market. The Ironfly Zesty is a good sized flipper in VG-10 and Micarta, it's very well done, and it's currently going for $49 shipped from China to your door.

www.ironflyknives.com

Worth checking out if you're a fan of top notch budget work.

[email protected]

! !

! !