chants like "from the river to the sea, palestine will be free" being antisemitic.
Iirc this can fall under antisemitism as it impies the wish to "destroy" izzy. I don't agree, but thats why.
Even though you're right about a lot of this, checking news' sources is always important, especially now.
Thats like the oppisite of the issue here.
Remembrance is so deeply ingrained into our society, that a lot of people in power are struggling to even criticise Israel.
Add to that highly emotionally charged discourse and frustration in the general public at these protests plus cops being cops, jumping at an opportunity to bash lefties and you get this bullshit.
Basically the cop felt like teaching that kid a lesson.. Nothing will ever come from this, its just overreach.
Double space + linebreak
for this and double linebreak
For a paragraph.
Doesn't help that thunder seems to eat a trailing space when you linebreak.
I'm not buying the travel didgeridoo they're trying to sell me via insta ads constantly. I don't play the didgeridoo.
Perks of declining cookies and disabling personalised ads anywhere i can.
Same same, i try to be aware of it and ground myself when i do catch it drift into just verbalising anxiety with no real benefit.
Especially when i should be enjoying reality instead, like during a movie, concert or hike
Imo its just a different thing.
Like, 1 or 2 here with sort of moving images like memories, sounds, conversations.
I still listen to interviews despite being able to make up convos in my head. I watch comedy despite being able to make up jokes and funny stories.
I watch movies despite being able to visualise whatever i want.
When i zone out, i can have full conversations with people ive never met in my mind while walking to work.
Basically flying blind through traffic, unless something relevant registers on my "conscious" mind.
Its about the ability to visualize things in your mind.
I'm guessing you're somewhere in the right half? /jk
dass Biden öffentlich Demenz performt und sich in Verschwörungstheorien zurückgezogen
Dass Bidens Demenz öffentlich krass breitgetreten wird, weil populisten populisten sind und Don mehr davon auf seiner Seite hat
Die sind beide sowas von durch ey
Not sure who would ever need an SUV, especially in an urban env. Most of the common ones have zero off roading capabilities either, so work vehicles are usually specialised.
Thanks for the link though, I'll forward it :)
Not just line go up. Line must go up more than it has previously gone up. A slightly lesser growth is apparently lethal
Yeah tbh there would be no harm in banning them. If you need a work truck, those are fine. No person in the world needs an SUV or an oversized pickup truck
Even the most reliable drivers overlook something, get distracted by something on the road or in the car. These features absolutely help more than they harm.
Of course not, what makes you think anything i said is even vaguely related to those negative cherry picks?
Is car manufacturing and design not tech?
Do impact detection, brake assist/auto brake, modern lane assist, distance detection etc not add to safety? I could probably rattle on
With the ever growing HEMA and reenactment scene, there are a bunch of really good forges/manufacturers putting out fantastic training equipment, replicas and custom work, sharp and blunt.
With our machining and material science I'd guess that a high end sword now would blow the originals out of the watee
Much safer now though. Traffic accidents are much less lethal nowadays (except SUV/Truck vs ped)
Yeah leaning on "tradition" or "conservation" when its just bigotry under the hood is a staple.
Adorable! I'm a bit fatigued of all the releases, but i love when they make beautiful trailers and supplemental content like this.
Airbrush newbie struggling
Since there isn't really a specific airbrush community, i'll try dumping my issue here ok? I'm following the Q/A structure of the airbrush subreddit for completeness sake :)
Alright, so I just got my first airbrush for my birthday - for mini painting - and I'm getting very unreliable / unpredictable paint flow after an initial clog and cleaning.
Airbrush make and model
Timbertech ABPST05
Compressor make and model
Same name, came with the set. Running just over 20 PSI during open airflow.
Paint or other medium you are using
First some Vallejo Black Primer with Vallejo AB Thinner, then some Scale75 White which clogged. Now I'm struggling with Citadel Shyish Purple contrast paint with thinner despite its already very liquid nature.
Have you done anything different lately?
After thoroughly cleaning (stripping the whole thing, running Timbertech AB Cleaner through the pot -> nozzle etc) I slowly started noticing unreliable spray pattern: I open airflow, then pull back ever so slightly -> a thin stream comes out for maybe a second -> stops. I pull back a little more -> a slightly bigger stream, then stops. Once I hit a "wall" on the trigger, it starts working a little bit better but still not entirely reliable. No bubbles appear in the tank during this.
Have you tried using just water, tear-down and cleaning...
Just water feels like it's working fine, just thinner also seems fine. I did a full tear down after it first clogged because that's how a YT video told me is the right way to clean an AB after every use T_T I'm pretty confident that I put it all back together right.
I switched out needle, nozzle and cap. I let some cleaner flow through the pot, out the front without a nozzle on to check the channel isn't blocked.
Any advice would be appreciated!
Forgot to update the pringle print
Probably the most satisfying print so far. almost full plate, entire model done in one go. It's a walker by Station Forge.
Full plate failed on the same layer
Some parts reattached in the corners as you can see, i'm assuming because they managed to peel off the fep there down the line.
Very odd failure anyway, i'll just reslice, and retry.
Pretty mean how hard this one was to detect. I paused and checked the print and looking at a full plate of solid supports made me feel safe :(
Deadlift Advice
I've been going ot the gym for a little while, using GZCLP on Perseus. Been making steady progress (besides a longer dip after a nasty cold) but I still struggle with deadlifts, especially now that they're getting a bit heavier.
-
I got a shit back and inherent anterior pelvic tilt, it's easy to tweak the lower back for me. I put a lot of emphasis on keeping it straight, neutralizing the tilt and bracing the core to support it. Still, sometimes I feel the pinch near the sides of the lumba spine. Any advice to help with that would be phenomenal.
-
I got stupid knees. They're not injury prone or anything, but they stick out. Several times now I bruised them pretty severely, mostly on the way down. The bar slides down the quads - as I learned it should - and then bonk into the tissue just above the patella before continuing around the knee. What am I doing wrong?
Here's my form at the moment of impact !Here's my form at the moment of impact
This is roughly where I hit and bruise !This is roughly where I hit and bruise
Finally a harvest worth posting
The first flush stopped with two pingpong sized fuzzy balls, after low oxy, high temperature thanks to a record summer.
This is the second flush. Probably got too moist and a bit too warm again because of a late heatwave. Any other guesses on why its so deformed?
Will make some battered wings from this :)
'No kill' meat, grown from animal cells, is now approved for sale in the U.S.
Noch immer nicht ideal aber n spannender schritt.
cross-posted from: https://beehaw.org/post/683402
> For all of human history, eating meat has meant slaughtering animals. But scientists behind cultivated meat say that's no longer necessary. They produce meat by growing cells extracted from an animal's body. And, today, the U.S. Department of Agriculture gave its first clearances to sell meat produced this way.