bready community shows /c/all
This has happened 3 times.
I load the app. I switch from my main account to this one. I wait a few seconds for it to load. I go to the bready community. It shows the all feed but it says bready at the top. I try to post, it's as if I'm posting from all, not bready, and asks me to pick a community. It doesn't do this with homebrewing or 3d printing.
blonde in the mash and boil
Also, my mug works as a grain scoop nicely. https://files.catbox.moe/sdesos.jpg
Pizza roll ups
First attempt at pizza roll ups. Not bad, need work, but tasty. 3/5* s
Used this recipe but cut the lemon and changed the filling to pizza stuff. https://youtu.be/eP-gFkNE4-A
I am so on board. spider mech included!
I have to have that spider mech.
It was soupy indeed. Did not rise hardly at all.
oh, sovol. get some quality assurance. sv06+ x pulley is off center
I've been trying to troubleshoot a surface texturing issue for several weeks. I accidentally noticed the pulley had wobble, but thought it was the stepper motor at first. Nope. It's the pulley.
Oops, forgot dough in proofer.
Accidentally left my dough in the proofer overnight. I wonder if it'll do a second rise. Time to find out.
Make the recipe 10% or 20% more. It fit a 8x8 but not well.
Try AP flour instead of bread. It was good, but I'm just curious.
Try the whole egg in the dough instead of just yolk. I don't know much about why sometimes yolk alone or not.
Crumble topping maybe. The cream cheese is good, but I like crumble stuff better usually.
Cut back on the lemon. It's really strong. I didn't measure it well, just put a dash in, but it was a lot. The blueberry was second place and I'd like to taste it more.
Yes. Blend them into a puree, use same amount as blueberries. Probably blanch the skins off.
Blueberry lemon roll ups with cream cheese icing
Very stressed out, so that means baking! Blueberry lemon Roll Ups recipe by ChainBaker. https://youtu.be/eP-gFkNE4-A
Depends on how dense the board is. Infill is a choice when printing, so more plastic means more cost. I get my filament from $10 to $20 kg. Depends on sales and colors and such. These prints cost me $2 ish.
Theres a cereal bowl to the left. No bananas in it tho.
Desk knick knacks.
tiny desk shelves
Tiny desk shelves for kiddo. Stl https://www.printables.com/model/713135-tabletop-shelf-rack
I wouldn't do that in the slicer, it's too hard to align them. I don't know about any alignment tools in slicers. I could do that in Fusion360, however.
Gridfinity 2x2 organizer for my bathroom
Printed out this little bathroom or whatever organizer. Gridfinity is neat. Choose your bins, glue to the base and viola.
Stl https://thangs.com/category/Gridfinity
Got them for free, other wise I wouldn't. They're also only 3 gallons, so a lot easier to handle. Haven't tried them yet, but a porter is going in this weekend.
Check out some of the references! They were so flimsy.
None. It was store bought juice labeled apple strawberry banana.
Carboy dryer, stackable, for homebrewing. (OC)
STL https://www.printables.com/model/866603-carboy-dryer-stackable
Description I wanted a carboy drainer that was 3d printable (because why not?). They're stackable, too.
References:
- This model on Amazon was nice https://www.amazon.com/Blue-Carboy-Drainer-Pack-2/dp/B074KL8QD2
- I liked the handle cutout on this model https://www.printables.com/en/model/734966-carboy-drainer
- This model wasn't bulky enough and I didn't like the feet. https://www.printables.com/en/model/33122-carboy-drying-stand
- This seemed clever, but too fragile. https://www.printables.com/model/841046-carboy-dryer-for-plastic-23-litre-carboy
- This model was my main inspiration for size but wasn't bulky enough https://www.printables.com/model/305346-carboy-dryer
Licensing: Credit/attribution/link is my only requirement. Free to use, modify, or sell. Please share your work, I love to see it.
Carboy dryer, stackable, for homebrewing. (OC)
cross-posted from: https://lemm.ee/post/31379850
> STL https://www.printables.com/model/866603-carboy-dryer-stackable > > Description > I wanted a carboy drainer that was 3d printable (because why not?). They're stackable, too. > > References: > 1. This model on Amazon was nice https://www.amazon.com/Blue-Carboy-Drainer-Pack-2/dp/B074KL8QD2 > 2. I liked the handle cutout on this model https://www.printables.com/en/model/734966-carboy-drainer > 3. This model wasn't bulky enough and I didn't like the feet. https://www.printables.com/en/model/33122-carboy-drying-stand > 4. This seemed clever, but too fragile. https://www.printables.com/model/841046-carboy-dryer-for-plastic-23-litre-carboy > 5. This model was my main inspiration for size but wasn't bulky enough https://www.printables.com/model/305346-carboy-dryer > > Licensing: Credit/attribution/link is my only requirement. Free to use, modify, or sell. Please share your work, I love to see it.
Shout out to [email protected]
Carboy dryer, stackable, for homebrewing. (OC)
STL https://www.printables.com/model/866603-carboy-dryer-stackable
Description I wanted a carboy drainer that was 3d printable (because why not?). They're stackable, too.
References:
- This model on Amazon was nice https://www.amazon.com/Blue-Carboy-Drainer-Pack-2/dp/B074KL8QD2
- I liked the handle cutout on this model https://www.printables.com/en/model/734966-carboy-drainer
- This model wasn't bulky enough and I didn't like the feet. https://www.printables.com/en/model/33122-carboy-drying-stand
- This seemed clever, but too fragile. https://www.printables.com/model/841046-carboy-dryer-for-plastic-23-litre-carboy
- This model was my main inspiration for size but wasn't bulky enough https://www.printables.com/model/305346-carboy-dryer
Licensing: Credit/attribution/link is my only requirement. Free to use, modify, or sell. Please share your work, I love to see it.
Shout out to [email protected]
grocery store cider - apple, banana, strawberry
First cider. It's made from grocery store juice, so not complex, but delicious. 3/5*s. Apple-banana-strawberry juice. Mostly apple, hint of strawberry, no banana.
1 gal juice, safale s04, nutrient, erythritol.
Knob replacement for strap, Eibos Easdry filament dryer (print)
cross-posted from: https://lemm.ee/post/29553039
> One of the best things about 3d printing is fixing problems that you and 2 other people have. This box dries the filament I use and the opening strap snapped off within a week. Someone made a knob. 10 min print. Bam. Works again. > > https://www.printables.com/model/765759-eibos-easdry-latch-fix-for-when-the-strap-snaps
Knob replacement for strap, Eibos Easdry filament dryer (print)
One of the best things about 3d printing is fixing problems that you and 2 other people have. This box dries the filament I use and the opening strap snapped off within a week. Someone made a knob. 10 min print. Bam. Works again.
https://www.printables.com/model/765759-eibos-easdry-latch-fix-for-when-the-strap-snaps
Sovol SV06 Plus Shelf for Filament Dryer
cross-posted from: https://lemm.ee/post/29388765
> I wanted a shelf to hold the EIBOS 3D Series X or whatever on top of my SV06 Plus. It's not a great dryer, I don't recommend it, but it's what I have. It works… kinda. > > PS, you can use this as a base to hold nearly anything up there. Snaps on. Modify as you wish.
Sovol SV06 Plus Shelf for Filament Dryer
I wanted a shelf to hold the EIBOS 3D Series X or whatever on top of my SV06 Plus. It's not a great dryer, I don't recommend it, but it's what I have. It works… kinda.
PS, you can use this as a base to hold nearly anything up there. Snaps on. Modify as you wish.
Yes. There are several I've seen advertised but I've never used. Pcbway, despite the name, has 3d printing services. I have no experience with them.
Raspberry Pi 3 Model B Case with Logo, Taller (make)
cross-posted from: https://lemm.ee/post/27620066
> > > Stl is https://www.printables.com/model/498730-raspberry-pi-3-model-b-case-with-raspberry-pi-logo/ > >
Raspberry Pi 3 Model B Case with Logo, Taller (make)
cross-posted from: https://lemm.ee/post/27620066
> Stl is https://www.printables.com/model/498730-raspberry-pi-3-model-b-case-with-raspberry-pi-logo/
I don't like curves in 3d prints, generally. They're all chamfered. The original has some curves.
I did try a brim. It was a huge hassle to remove. I don't mind brims on larger, simple parts, but on these smaller, intricate ones, it sucks.
Idk. Everyone I saw did the cheesecloth method but I have airlock, so that's what I used.
I swear I posted it! What the heck.
This was only 2 weeks in primary. How long does it take for lees to ruin it?
Hmm. I don't think it was the yeast. Could be, but I don't have this much stuff when I use it in beer. shrug it was safale us05.
Decent, even the sludge! Could have used a touch more back sweetening but just barely.