Skip Navigation
InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)FO
foo @withachanceof.com
Posts 4
Comments 128
What opened your eyes to what's happening in Palestine?
  • What opened your eyes to what's happening in Palestine?

    Gee, that's assuming quite a bit right out of the gate.

    We’re a group of activists in a Western country

    Care to name yourselves then or do I just take it on faith this isn't astroturfing? This whole post is pure propaganda from a user with an otherwise blank profile.

    While I have sympathy for the average peaceful person living in these areas, Hamas is a terrorist organization. Bring on the downvotes.

  • Fixed Arch install error
  • I use Grub for my bootloader so I'm probably not the best person to ask for rEFind problems, but a good place to start for everything Arch related is the wiki. The page for rEFInd has a configuration section that outlines where the config files are and how to read them. Check that everything there matches what you expect it to be: https://wiki.archlinux.org/title/REFInd#Configuration.

    If you've verified that your bootloader config is correct and it's installed on the drive you're booting from correctly another config to check is /etc/fstab to ensure you have a root device set in there too. The wiki is your friend here too: https://wiki.archlinux.org/title/Fstab

  • *Permanently Deleted*
  • Non-snarky answer: My guess is that after not answering any questions they'd assume you're just trying to waste their time and tell you to leave or actually be arrested for trespassing.

  • I am a bad software developer and this is my life
  • An interview is just a test.

    Whenever I speak with students/new grads about interviewing I actually specifically advise them that an interview is not a test. Yes, you need to have a certain level of base skills, but beyond that, an interview is much more like a date than a test. I say this because you can do everything right and still be rejected. It doesn't mean that you did anything wrong or there's anything with wrong with you, but rather there just wasn't a match between you and the company you were interviewing with at that point in time. There are so many factors entirely outside of your control that determine if you're given an offer or are rejected to the point that I find it really tough to consider it a "test" in the academic sense where you need to score a certain value to pass or fail it.

    Likewise, it's incredibly common for students/new grads to focus heavily on the technical skills while completely ignoring the soft skills. The best thing you can do in an interview is make the interviewer like you and want to work with you. It's amazing how many people will overlook subpar technical skills either consciously or subconsciously if they feel comfortable with you (the amount of borderline incompetent people I've seen hired that are otherwise smooth talkers is astounding). It seems like the author of the linked to article here might be falling into that trap too. He writes about his technical experience heavily but does not touch on the soft skills at all, even questioning at one point that he may simply be bad at interviewing which is a strong sign to me that he's not presenting himself well in the interview.

    This is something that transcends software engineering. If you're a sociable and likeable person you'll go far further in life than the person that is quietly a genius but doesn't work well with others. I wish more people folks in this industry would focus on that side of the coin instead of simply saying "grind Leetcode more to get more offers."

  • People of Lemmy! How to get fit?
  • If you're not overweight and simply want to become more athletic I personally think the most important thing to do is to find an activity you enjoy. That's something you have to discover for yourself.

    For example, I can't stand working out for the sake of working out at a gym. But I do get really motivated by climbing, hiking, trail running, and skiing. Climbing builds strength and has a certain level of problem solving involved too so it's mentally stimulating. Hiking and trail running are excellent cardio and have clearly defined goals to reach a certain summit or some endpoint. And skiing is just a blast in all forms. All of that keeps me active and having fun while I'm doing it. That makes me want to do it more which allows me to set bigger objectives and then it builds on itself.

  • Outdoor WiFi bridge and access point?
  • Yeah, I understand that, but my question is about if I can do both an outdoor directional WiFi bridge AND omnidirectional access point with one device. I'm not concerned about the indoor situations on either end as that's all wired networking. The buildings are metal siding and roofs so I can't do a normal indoor access point to serve outdoor devices as the metal construction blocks virtually all of the signal even a few feet on the other side of the exterior wall.

  • Outdoor WiFi bridge and access point?
  • Interesting, would you say it's acceptable to use something like this as both a bridge and something to connect to for phones, for example, around the outside of a house too in any direction? Or is the antenna for that too directional?

  • *Permanently Deleted*
  • Would you question it if he had a foreign sounding name?

    That's irrelevant. This isn't a race/nationality thing yet for some reason you feel the need to make it one.

    Also, if it was something like suicide or something, we would have heard about it by now.

    It has been less than 24 hours. How in the world would we have known this person's full intentions by now?

  • recommended search engine?
  • I tried for years to breakup with Google search, but always kept coming back to it for one reason or another. I started using Kagi a few months ago and have not even thought about Google since then. I really can’t recommend it enough, especially now that the $10/month plan is unlimited searches.

  • What are some good upgrades for an F250 driven on rough forest roads?

    I have a new-to-me 2010 F250 that I use for driving forest roads in the PNW often to get to trailheads. Due to all the rain (and general lack of maintenance funding) our forest roads here are in pretty bad shape with many pot holes and rocky sections. I'm not looking to do any serious off-roading, just drive rough forest roads with confidence.

    So far I'm planning on getting better off-road tires since that's low hanging fruit. Beyond that, I was wondering about a limited slip differential? I've definitely had a few times where the open diff would result in one wheel spinning when the other still had good traction. I'm not sure how difficult/expensive that would be, but would it be worth it?

    Aside from that, are there any suspension mods to help with the many pot holes maybe? Anything else to consider?

    17

    This community inspired me to buy and restore my first hand planes

    imgur.com Imgur: The magic of the Internet

    Discover the magic of the internet at Imgur, a community powered entertainment destination. Lift your spirits with funny jokes, trending memes, entertaining gifs, inspiring stories, viral videos, and so much more from users like s201.

    A few weeks ago I posted here asking about buying a first hand plane and if it was worth dropping ~$400 on a Lie-Nielsen one.

    After all of your comments about getting an old Stanley I kept an eye on Craigslist, Ebay, and FB Marketplace for a little bit and ended up finding someone selling a collection of pre-WWII Stanley planes about an hour north of me. Including, specifically, a 4-1/2 and a 5-1/2 which was exactly what I wanted.

    Knowing that the 1/2 sizes were less common than the round numbers and since the guy was local I jumped on it and ended up buying both for $40/each. The linked to album is the before and after of the 5-1/2 after cleaning it up. It's all tuned up and works beautifully. All in, I'm at $80 for two planes, $15 for cleaning materials, and $35 for a whetstone sharpening kit; way cheaper than a new Lie-Nielsen and I got two planes! Thanks everyone!

    https://imgur.com/a/AoABAsI

    14

    Need to flatten a panel, what's the best first hand plane for me?

    I’m working on a project with a 19x26" panel that I realized after gluing still has a bit of a twist in it across the three boards. In the past I’ve simply sanded down panels, but I think this one is going to require a plane. Thing is, I’m still fairly new to woodworking and don’t have any planes yet so I’ve been doing my homework on which to get.

    I generally avoid buying junk tools, especially Chinese junk so that rules out a bunch of the options. Plus, I assume I’d find it difficult to tune up an old one since I’m not knowledgeable enough about them yet. Because of that I’ve ended up going straight to the top and considering either Lee Valley or Lie-Nielsen.

    Given that my immediate task is to flatten a panel I was thinking either a #5 or #5-1/2 high angle jack plane knowing that I’d likely expand the collection in the future with a smoother as well, but for now I’m only looking for a first one.

    Does that make sense for me? If so, any tips on deciding between the #5 and #5-1/2? The #5 is a bit cheaper, but it seems like the slightly bigger #5-1/2 would be good if I followed it up with a #4 in the future. Specifically I’ve been looking at:

    • https://www.lie-nielsen.com/products/no-5-1-2-jack-plane-?path=bench-planes
    • https://www.leevalley.com/en-us/shop/tools/hand-tools/planes/bench/115289-veritas-custom-number-5-1-2-jack-plane?item=06P1571A
    19