![elb](https://lemmy.sdf.org/pictrs/image/7671ab14-12b9-4376-88d9-721fa301cd89.png?format=webp&thumbnail=64)
I like old radios, old computers, and computing history. I teach Computer Science as a vocation.
I show 0.18.4, you may want to shift+reload. :-)
I agree with all of this.
For me, I think the best "I want the SPARC experience with minimum fuss" boxes are the SS 5/20 (which are very similar machines, the SS20 is sort of a multiprocessor SS5) or the Ultra 1/2 desktop workstations. All of those are SBUS machines (there are PCI machines with the Ultra 2 CPU and chipset, too, I think, but they're not just called "Ultra 2"?).
I also think of Solaris 7 as peak Solaris, I don't think you're alone there @[email protected] . If you want something past Solaris 7, just go with OpenSolaris/OpenIndiana/etc. and do "new Solaris" whole hog.
Shift+SPC is not able to be represented on a TTY, due to the way that input is encoded. It should be possible in X11, but my Emacs also does not seem to register it.
I have a set of GPIO boards for my PDP-11s, I've been wanting to turn one of them into a G-code interpreter.
It looks like [email protected] is quite a bit larger, which is why there's been almost no traffic here; probably I should close this community.
You need a VPN or a reverse proxy or similar for this.
What you want is either a service that gives you an IP address unrelated to your physical location (a VPN), or a machine that is willing to accept connections for you and forward them transparently to your machine (a reverse proxy).
You can set up your own VPN to proxy connections by getting a host from ~any hosting service and running something like OpenVPN on it.
It is, but it was reset (again) relatively recently. You may need to contact membership@ to get access.
SIGCSE 2023: Impact of Several Low-Effort Cheating-Reduction Methods in a CS1 Class
This article discusses several cheating-deterrent methods (education, evaluation, clear expectations, etc.) and evaluates their combined effectiveness in reducing cheating in a CS1 course.
I use all of these methods in all of the courses I teach, and I find that rates of students cheating fluctuate significantly over time. In particular, I had managed to get violations (at least, identified violations) down to nearly nil for a few consecutive semesters, but this past semester they spiked significantly. Many students blamed ChatGPT, but it is my professional opinion that old-fashioned plagiarism was at least as well represented as ChatGPT even for students who blamed the usage of ChatGPT for their infractions.
Welcome to CSE Education!
Education in Computer Science and Computer Engineering is difficult, and growing ever more difficult as the fields grow and expand. Numerous studies have shown that STEM (science, technology, engineering, and mathematics) students work harder and longer, often for poorer grades, than other disciplines. Within stem, CS/CE are some of the more difficult majors for many students.
As a professional educating students in one of these fields, what are your techniques? What are your pain points? How do you keep students engaged and motivated, and how do you measure their progress?
These questions are what this community is about. I don't have all of the answers, but I sure do have experiences, and I certainly have questions!
Join me in building a community of practice around best practices and experience-sharing for educators of CS and CE topics.
I'm not sure it will; as I said, I have heard that subscribing to kbin from lemmy is not currently working, from users on mastodon. (I just tried that search and it indeed did not work, for me.)
Keep in mind that this lemmy instance is currently "in beta", and sdf betas have in the past been reset for various reasons. The sdf mastodon services are very stable, as is its peertube, but since the lemmy server is very new I would treat it as potentially volatile for a bit longer.
Donations specifically to support SDF's fediverse ventures can also be made here: https://sdf.org/support/
Note that you enter the URL as !community@host
.
I've seen chatter on Mastodon that kbin will view lemmy communities, but lemmy doesn't correctly view kbin magazines. I don't know if it's accurate or not. I have been able to join lemmy communities on other servers, however.
I have never owned a Baofeng (and probably never will; I do not like that they frequently have very poor spurious radiation characteristics, and people act like that's not a problem!). My first mobile radios were Kenwood and Icom, my first HT was a Standard (before it was acquired by Vertex and then Yaesu), the mobile in my vehicle right now is Yaesu (FT-7800), and my packet station (when last set up) was an Icom. I'm not particularly tied to any one brand, as you can see. :-) (Most of my HF equipment is tube type, so it doesn't enter into this equation!)
I rather like the FT-7800; I think it's much easier to use and has a much better UX than the FT-70. That said, in 2023 I would expect more; it's been in my vehicle for probably 15 years, now. I don't know if the replacements (I don't actually think the FT-7900 is that much newer?) address some of its meaningful shortcomings like lack of reasonable USB programming support (for real people, why do these radios not simply expose a well-documented HID or serial interface?), but as far as day-to-day usage, the 7800 is quite fine. The 70 ... is less so. As I said, if you don't actually have to change anything, it's not bad, but if you have to change things it gets hairy fast.
A brief review of the FT-70D
I have a Yaesu FT-70D, and I have had it for almost exactly one year now. My review is this: it's OK. It's not great, but it was also pretty affordable, as far as VHF/UHF HTs that aren't just junk go. (It normally runs about $175, but seems to go on sale pretty frequently for quite a bit less.)
First off, a disclaimer: I really only use VHF/UHF when I travel and for events. I'm not a big FM rag chewer. An HT is a tool for me, not something particularly exciting. I have a mobile radio mounted in my vehicle, and I have at times (I do not currently) had a mobile set up as a base station in my home for either voice or digital traffic, or both.
As far as positive features, the FT-70DR is a very comfortable size, has a very serviceable loudspeaker, and the transmitted audio quality is reportedly good. It does have Yaesu System Fusion (although I've been able to exercise this very little due to lack of convenient local support). While there are many online complaints about battery life, I have found it quite satisfactory; I don't work it too hard, either, though. Fitments (such as the belt clip, battery pack, etc.) all seem quality and durable, and while I haven't put its IP rating (IP54; dust protected, tolerant of water splashes) to the test, it's clearly a tight enclosure.
My list of gripes is longer.
The antenna that came with it was fairly deaf; I tried a cross-town chat with a friend of mine who had an HT on a rooftop antenna, and we really struggled. After tuning around a bit and comparing signal strengths, it appeared that my reception was quite poor. I purchased a simple dual band whip from MFJ (I think it was under $30, maybe under $20?), and my reception improved noticeably. It is, of course, longer and more stabby than the Yaesu rubber duck.
It has no dedicated memories for the weather bands, which surprised me, because at least some of the Yaesu mobile radios that share its design language have this feature. This feels very unfortunate, because while the local weather stations can be entered into memories easily (it has something like 1,000 memories, you're unlikely to run out), they'll stop scans if they're included in a scan; the mobile radios have a feature where they only stop on weather stations if they're playing an alert tone, and they scan them frequently enough to catch one if it's there.
Speaking of memories, dealing with the memories sucks. You absolutely need the manual to do many things with this radio, unless you just use it all the time. I'm a "set it up once and don't look at it again until I have to" user for VHF/UHF, so when I travel (for example) I have to make sure I have the manual PDF with me, because otherwise there's no way I'll get local stations plugged into it.
Speaking of plugging memories in, I never was able to get it to communicate reliably with computer control software, despite the fact that it has a USB port right there on the side and comes with a USB cable. You have to do some ridiculous dance where you power it off, then remove the battery, then plug it into power while holding the power button, or something like that, to get it to go into programming mode. It's bonkers, and it's also unreliable. I'd blame it on user error, except the Internet is basically filled with people having the exact same problem, and then some reply guy coming in and saying it's never been a problem for him, he just has someone lend him a third hand while holding it upside down after taking it directly out of the freezer and then it works fine.
In general there's clearly never been a UX person near this radio. Changing the volume requires holding a button and turning a knob at the same time. There are rubber flaps on both sides of the radio, both of which can be picked out rather easily with a fingernail, and one of them is the control buttons but the other one is the charging, USB, and headphone ports. To top it off, the bottom symbol on both sides is related to power. Guess which one I've picked off by mistake more than once to plug in power? Guess which one is a LOT harder to get back in than it is to get out? The menus are impenetrable, and every button has three functions (push, hold, function+button) or more.
The model number of the charger that it comes with is SAD-25, because it's really sad, and it takes 25 years to charge the battery. However, if you pay $50 to Yaesu for a drop-in charger adapter, the exact same charger will charge the battery in much less time. Now, this might not completely be rent-seeking, because the cradle has a three terminal interface while the trickle charger has only two, and the smarts for rapid charging the Lithium battery might be in the cradle, but ... why?
Then there are the gripes I have about almost all ham radio equipment: why won't it accept a standard headset? Why doesn't it have support for a BLE headset, for that matter? Why doesn't it charge off a standard USB port? Why can't it charge and operate simultaneously? Using a ham HT usually feels like stepping back a decade. I do appreciate that radios like this are built to a different spec; I don't want it to have a color touch screen, or a glass back. I do, however, wish it respected the past two decades of electronic progress. I honestly feel like the Standard C-158A that I have from the mid-'90s with a Lithium battery pack would be a more ergonomic and easy-to-use radio!
In short, would I buy it again? I don't think so. I think I would buy a radio without System Fusion and with a simpler interface (these things aren't always guaranteed to go hand-in-hand), probably for a bit less money, if I were choosing a second time. Perhaps a FT-60R or FT-65R, or a competing radio from Alinco, Icom, or similar. I think I could save $30-50 and get a radio I'm at least as pleased to own, if not more so. Maybe things would be different if System Fusion had more buy-in in my area, or if I were more of a VHF/UHF guy.
Yes, with the link direct it works, but searching for terms such as "emacs" and "elisp" it did not show up. Lemmy does not seem (as far as I can tell, so far) to federate things like hashtags, which is how Mastodon finds things like this. At the very least, it feels like it should be federating community names!
Hamfest in WNY tomorrow, June 10
One of the local radio clubs (of which I am a member) is hosting a hamfest tomorrow morning from 8 AM until we get tired (vendors welcome at 7 AM). Entrance is $8 for all attendees (vendor or browsing), vendors should bring their own tables. It will be at the Cambria-Wilson Volunteer Fire Hall on Cambria Wilson Rd. in Cambria, NY.
Map: https://openstreetmap.org/search?query=4631%20Cambria%20Wilson%20Rd%2C%2014094
This is our second annual summer hamfest (we used to hold them in the winter), and last year's was very well attended. It looks like tomorrow's weather should be great, so I'm hoping for a good turnout again. We're close to Buffalo, Toronto, and Rochester.
I'll be wearing a navy LARA polo shirt with my call sign (KB8OJH) and (probably) a leather wide-brimmed hat. If you should drop by and see me, say hi!
I have/had nothing to do with retrocomputing on any large corporate sites, but I'm a mod on https://retrocomputingforum.com/ and look forward to seeing what happens here. I don't necessarily need or want a mod role, but I'm happy to help out in any way I can.
It looks like there is lemmy.ml/c/emacs, which I was unable to discover using the search bar on my instance.
Welcome to the Emacs community!
I didn't see an #Emacs community on lemmy (maybe I didn't know how to look, or didn't look hard enough), but Emacs has always had a strong presence on various social media sites. Here's one for the Fediverse!
Please feel free to boost this community, invite other Emacs users, and get some content going. If another Emacs community rises to the fore, perhaps we'll move there ... but for now, here's a home for all things Emacs.