I usually use Psensor to monitor temperatures but it's not available on Guix yet. Can anybody recommend an alternative that does work on Guix ?

I tried to update my Pinephone CE using "sudo apk upgrade -a" and received the error

"Not continuing due to stale/unavailable repositories. Use --force-missing-repositories to continue"

I am on 23.12 with Phosh. I remember hearing that the Pinephone may be getting dropped from main to community so I wasn't sure if this was related to that or something different. Is it safe to use the command it suggests ? I figured I would ask before blindly doing it.

I just tried installing Gnuinos and after finishing on first bootup this is what I get. I have tried on both Runit and SysVinit so I don’t think it’s do do with init issues. Any ideas on what the issue is and how to fix ? This system works fine with Trisquel so I know it’s libre friendly.

I had installed Guix with Mate as my DE but a big part of my desktop experience is having Plank as my dock. I don't see it in the package list on the Guix website. Am I mistaken or is Plank not usable on Guix ? Any recomendations for alternatives ?

I would love to use PostmarketOS as my daily driver but my Pinephone CE isn't really giving me the battery life I need to make it happen. I am looking at what phones I can get my hands on in Canada that would be better suited. So far the OnePlus 6T seems to be my best option. I can't get the Shift6mq or the Poco F1 shipped here. Any suggestions if battery life is my main need ? I take my phone off the charger at 11am and don't get home until close to midnight with no way to charge while at work.

Obviously things can change over time but does anybody know if there is currently any planned support for the RISC-V version of the PineTab 2 for PostmarketOS ? Would a RISC-V device even work with PostmarketOS ?

I see that ntfy has an Open Collective but I don't see the option to donate using that. Will ntfy change this in the future ?

I recently installed Guix in hopes of learning to use it. I wanted to update the system and gathered from the reference card that the proper command was "guix pull". My issue is that while no error message is given this didn't seem to update anything after. One thing that makes me think this is that I'm still on the 6.0.10 kernel as I was before. Am I doing this wrong ?

Are there any plans to add support for full disk encryption in an installer for the RockPro64 like the Pinephone and Pinetab have ?

I had a person ask me the other day if I knew of any stores that sell hardware with Linux preinstalled in Africa; Latin America or Russia and I couldn't think of any. I know plenty in Europe; U.S.A. and Canada but none for those places. Do any of you know of any ? They didn't mean stores that will ship there but stores that are based there.

Ubuntu has announced support for The PolarFire SoC FPGA Icicle Kit RISC-V Board. I am not always a huge fan of Ubuntu but if you're looking to get into RISC-V boards they seem to be always on the forefront of support. RISC-V is a great platform to get into as many boards have an open source BIOS and the architecture as a whole is a lot more open than x86.

The board can be found on Mouser among other stores.

https://www.mouser.ca/new/microchip/microchip-polarfire-soc-icicle-kit

Are there any VPN's that work on PostmarketOS ? I would be using on the Pinephone CE; Pinebook Pro and Rock Pro 64. I usually use Proton VPN or Mullvad but i'm not overly picky.

I recently received my MSI PRO Z690-A DDR4 motherboard from Dasharo. It came with version 1.0 which from what I understand has a different update process than later versions. Am I correct in understanding that I need to open a Terminal and type in "flashrom -p internal -w [path] --ifd -i bios" substituting the path bit there with the actual path to the file I downloaded ? Figured I would ask first before diving in.

I have recently got PostmarketOS setup on my Pinebook pro and am enjoying it. I am missing a few programs from my desktop though and was wondering if there is a way to get them on PostmarketOS. They are Plank and Psensor. If Plank is a no go is there a way to adjust Gnome Dash to always be visible ?

Does anybody know of a Swiss based server for Matrix ?

Can anybody reccomend a FOSS replacement for the museum software PastPerfect ? Needs to be available for Windows 10. I was able to find CollectiveAccess and CollectionSpace but neither seem very easy to get setup. “CollectiveAccess” for instance needs to be built from source. This museum has novices at best when it comes to tech.

I'm trying to install PostmarketOS onto my Nexus 5 but when I type "pmbootstrap init" into my terminal I get "command not found". It is installed through the AUR on my Garuda system. When I type "pmbootstrap --version" I get back "1.42.0" so it seems to be installed and detected. Any ideas ?

I currently only use PostmarketOS on my Pinephone CE and PineTab. On the Pinephone CE I find I can sometimes go from a full charge to 50% or less within 4-5 hours which is keeping it from being my daily driver. I know this is still being worked on but for anyone who has used PostmarketOS on other devices, is there a phone you could recommend that would give me about 11 hours of life between charges ? My main uses are FluffyChat; Tootle and light web browsing ? I usually use Phosh if that matters.

I have been interested in getting into small amounts of Bitcoin for a while now and finally decided to begin today. Looking at exchanges I was going to settle on Coinbase but so far they want my phone number; drivers license info; address; and who knows what else if I get past that. Is this normal ? I feel like it's going to want to a DNA swab next and I haven't even gotten to make a single trade yet. I'm in Canada if that matters.