I'm pretty much a total novice to fighting games, but one of my BFs is super into them. We got talking about indie vs big studio games, and I did some digging for really niche ones just out of curiosity. That's how I stumbled onto Battle Craze, and now we're both super hooked on it!!

The art/animation is very quirky but don't let it put you off, it really grows on you, and the voice acting is amazing. The mechanics (according to my much more knowledgeable BF) are very advanced. It's just really fun in general.

The only thing is, the community is soooo small that everyone who isn't a beginner is some kind of super skilled veteran instead, so it can be hard to find a reasonable match. That's why I'm posting, hopefully more people will get into it 😝

I don't know how common this might be, but I do my nalbinding (nålbinding/naalbinding/etc) quite a bit differently than any instructions show. I keep my working loops on a long long knitting needle, and hold that the way an English cottage knitter does. I use a small tapestry needle for my naal, and I mostly work with thinner cotton yarns. Since you can't wet splice those, I Russian join the segments together. The whole thumb-hold thing never really worked well for me; even when it went right, my fabric would be all loose. That's probably just a skill issue that I could overcome with time, but my way works now, so I stick to it lol. Also, it helps me keep track of which loop is which. If I'm doing it correctly, this ought to be Mammen stitch. I hope.

That said, the traditional way clearly works very well for most people! Look at this person's beautiful stitches.

Chances are, there's a chapter near you of some group dedicated to a specific niche textile. Many of these arts are a little neglected these days, so groups dedicated to them are usually really happy to get new members. Plus, they'll usually have something cool like "Guild" or "Society" in the name, which just feels neat to be a part of lol. This group linked here is having a Lace Weekend on 11/2-11/4, with lots of different crafts present. If I make it out there I'll report back, with pics.

At some point, we should probably add a page to the wiki linking to all the official needlecraft Guilds and Societies out there. Or at least all of them that we can find, they can be pretty obscure!

If the only reason people care about NaNoWriMo is for the name and hashtag, somebody already pitched Writevember as a replacement. Honestly sounds better to me anyway.

I've heard other people say the tools/gamification/etc on the NaNoWriMo platform were really helpful though. For those people, how difficult would it be to potentially patch that stuff into the WriteFreely platform? As one of the only long-form Fediverse-native platforms still being actively developed, maybe they'd appreciate the boost in code contributions.

A weird thing about Tunisian crochet is that the flat and in-the-round variants are quite different from each other! Flat uses a singed ended hook, and round uses a double ended hook. Flat builds up stitches on the hook in one direction, and removes them from the hook in the opposite direction. Round builds up stitches in one direction, and removes them in the same direction, but off the other side of the hook. There are patterns you can produce in round that seem impossible to do in the other, and vice versa. Here, I'm trying to guess at one possible flat method to mimic this traditional in-the-round pattern.

So, intuitively it seems doable the standard way, at first. The beginning goes easy enough. You work forward in yarn color A, then tie in yarn color B and do your return pass in that. Now, you go to do the next forward pass, but gasp! The working end of yarn color A is still over on the other side of the work! You left it there when you tied on yarn color B.

One attempt I've seen done is to carry the unused yarn along the back of the work, but it's messy and makes for a loose fabric. I went another method:

!Sample square worked flat in roughly the same pattern as the header image of the post

How this goes is, you use the double ended hook you'd usually use for in-the-round. You pick up and remove stitches with the two ends as you would in the round, until you get to the other side. This is where it gets weird. Now, you do that exact same thing over again, except you do everything in reverse! The side of the hook you were using to remove stitches, now you're using it to pick them up. And the side you were using to pick up stitches will remove them. It doesn't feel great or intuitive, it's basically like switching from left handed to right handed or vice versa.

It works, but as you can see there's one more problem. The vertical ribs in TSS always tilt slightly to one side, but now the tilt direction changes each row! There is a way to fix that using twisted TSS stitches on alternate rows, but to make it more complicated, I also wanted to have a solid color border at the left and right. This is roughly how I thought it could go, combining this new method with the float method mentioned earlier for the sides:

!A difficult to follow chart of the method

So, incorporating all this, I tried it again. Here's the comparison, with LOTS of mistakes. It was eally hard to get the hang of lol. Check it out:

!Comparison of 2 attempts

All in all, I think it came out really well! The finished kōji had this incredible, indescribable taste/smell. Maybe kind of, flowers and mangos and peaches? I used it to make a ton of miso.

I used Modernist Pantry kōji kin and organic basmati white rice, and a makeshift immersion circulator/floating water bath incubator thingy. The rice was steamed in unbleached muslin cloth until just a little undercooked, then the same cloth was used to line a metal tray. The rice was spread into hills and valleys, covered with more muslin, then tented with some aluminum foil over the whole thing. The foil was mostly to keep condensation from dripping off the roof of the incubator onto the muslin cloth.

I put it in the incubator with the circulator st to 90 F.I stirred it at 12 hours and again at 24. It got appropriately matted, and for the most part it wasn't too wet. However, there were a few spots where I think it was getting on towards sporulation already, as you can see here:

!Some darker spots, maybe close to sporulation

Could have been some extra humidity collecting in those darker spots? The tinfoil tent kept the incubator condensation from dripping on it, but I guess nothing prevented the tinfoil condensation from dripping lol... Anyway, the entire process seemed to go way faster than all the guides lead me to believe. I broke it all up as best I could and put it back in set at 84 F with the lid open for lower humidity. By 24 hours it was maintaining about 97 F on its own.

One of my boyfriends is heathen, so I dual-color 3d printed him a set of Futhorc/Anglo-Saxon runes. Hopefully they're correct, very much not an expert lol... The Wikipedia page made me a little unsure on which symbols should or should not be included. These are made from PHA (polyhydroxyalkanoates), a new-ish thermoplastic that's naturally produced by a variety of bacteria, and breaks down harmlessly in any biome. Then, they were polished in a vibratory tumbler and anointed in black walnut oil infused with white pine, bog Labrador tea, yaupon, and sweetfern. I posted the files elsewhere if anybody wants to print their own!

Or rather salt rising muffins, but still. For those unfamiliar, it's an obscure Appalachian bread. Rather than being risen by the CO2 produced from yeast or baking soda, it's risen by the hydrogen produced by Clostridium perfringens bacteria. This gives it a different texture and a funky/cheesy taste. Still fermented, so I hope it counts for the rules! Crumb shot:

!Crumb shot

Mine isn't great compared to anything you'd get from Rising Creek Bakery, who literally wrote the book on salt rising bread. As you can see, mine came out pretty dense, but that's definitely not because of the kind of bread it is. I think it's more because of the 100% whole wheat, and my own lack of skill. It took me like 6 tries to even get the starter right lol. But I thought, maybe people have never heard of this and would be interested. I used wheat berries from Castle Valley Mill, which is only a couple hours away from me, and ground them in a hand-crank mill.

Usually tablet weaving is done with square tablets that have 4 holes, but 6 hole tablet weaving is known from various times and places throughout history. It opens up tons of possibilities for new color patterns and strength. The late great Peter Collingwood's book The Techniques of Tablet Weaving goes into some detail about it, but the patterns are quite daunting! As you can see in the pic, though these are 6 hole tablets, I'm only using 4 of them for now. Working my way up lol. Not even a particularly fancy pattern on this practice piece:

!Tablet woven sample piece

I couldn't find any hexagonal tablets for sale that matched what I wanted, so I 3d printed these ones. The design has changed since:

!3d printed hexagonal tablets for tablet weaving

The pips around the outer holes helps you keep track of which thread you're on. The idea with the center hole is that you can put a star shaped rod through it that holds everything still as needed. I thought I'd be able to use the rod to make turning easier, isolate out individual tablets easier, etc. However, (obvious in retrospect) the threads just get wrapped around it and make it hard to remove after turning. Whoops!

!Star shaped rod for holding the tablets still

I've since been told that you can use a central hole to give each plied warp of the finished work a core thread/wire for super strong fabric! So that's pretty cool.

Has anyone else experimented with non-square tablets?

I'm a total amateur, but here's what I did:

1. Soak 1.5 lbs beans for 6 hours in water with a little baking soda
2. Change water halfway through
3. Preheat immersion circulator/sous vide chamber to 110 F
4. Pressure steam for 20 minutes
5. Spread into wide flat container
6. Stir old nattō into 1/2 cup water, mix evenly into beans
7. Lay plastic wrap snugly against beans, poke many holes
8. Cover tightly with tin foil, poke a couple holes around edges
9. Poke corded probe thermometer into center from edge
10. Float in immersion circulator chamber for approximately 20 hours

The temperature in the beans generally kept about 2 degrees less than the chamber. I think we want the early fermentation to happen at 108 F and then cool to 100 F, so I tried to keep adjusting it based on that. Anyway, the result was pretty tasty!! The bacteria seem to take well to black-eyed peas. Might have been a little less stringy than "normal", but still delicious!

First, for anybody unfamiliar with it, the basic idea is to create knitted fabric with a crochet hook, thus knit-hooking, or knooking. Anybody familiar with both knitting and crochet will know one of the major differences is that knitting keeps a whole bunch of live stitches open the whole time, while crochet keeps just one. Where crochet stitches are dependent on just the stitches at their sides, knit stitches are also dependent on the stitches above and below them. To achieve knitting via crochet, the basic steps are:

• Use what looks like a basic crochet hook, except at the back end there's a eye-hole, like in a sewing needle.
• Attach a length of yarn/cable/thread/etc to the eye-hole.
• Do all your picking up and transferring of stitches with one hook instead of two needles.
• Keep all the live stitches on the length of yarn at the back, which can be reached by the hook since it's flexible.

It's a relatively new invention, and still very niche, as one can tell from the fact that it doesn't even have it's own Wikipedia page. It only gets a brief mention on the wiki pages for crochet hooks and for knitting in general.

Now, the topic for discussion in this post is whether knooking is capable of, and suitable for, making it's very own structures. Is there a way, using what can generally be thought of as "knooking", to make a fabric that is not identical to either knitting or crochet? I've asked this question in the past, and one person took it upon themself to investigate further. They suggested: > ...a knitting type stitch (by that I mean it should not close the stitch as in regular crochet but leave a loop on the hook/cord) but with some loop through loop drawing that requires the hooked end to make. What I'm thinking is something like a knit stitch through which you draw a loop (or more than one) like you were making a crochet chain. !A loose netting like structure that's not identifiably knitting or crochet

Internet sleuthing hasn't turned up many results on this topic, it seems like not many people have really looked into it. If anyone has any thoughts, or has given it a try, or would like to give it a try, let us know!

I should have thought to ask this earlier, sorry. This is only the beta test of the software, and I just recently noticed the instance isn't super active so far. It occurred to me that maybe y'all aren't ready for anyone to treat this as home just yet? Will we be overtaxing the system if we post/subscribe too much, or have to worry about all our stuff disappearing from breaking updates/migration/etc? It's such a nice platform I just started moving right in without thinking about it!

The USDA's plant database shows something like 50-ish native viola species in Pennsylvania, where I live. As far as I can tell, they're all more or less edible, but what about the flavor? Are there any especially choice species that really stand out? Internet sleuthing doesn't seem to turn up much of anything. So far, I'm getting the vague sense that purple ones generally taste better than yellow or white ones, and that short species might be sweeter than tall species.

This seems like the sort of thing that somebody somewhere must have figured out by now, since violet used to be a pretty popular flavor. The classic liqueur Creme Yvette is very specifically flavored with these obscure Italian Parma violets, which implies that they must taste somehow unique. So what about the rest of them?

I made this mostly as a way to practice as many Tunisian in-the-round stitches as possible. It is a pretty comfy purse though! The yarn is interesting, I found these enormous spools of it at Goodwill. It's very fine, maybe lace weight, except it's slightly fuzzy? It's not very strong but once it's worked up into a reasonably dense fabric, it'll hold up. Gives the finished object a soft and fuzzy feel.

There's no pattern, but it's very simple. Just work the body of the purse in-the-round as one big cylinder, switching types of Tunisian every few rows for coolness. Then separately make a thin, lonnnggg band of flat Tunisian simple stitch. Slip-stitch the band to the bottom of the cylinder to close it off at one end, and then continue stitching it up the sides of the cylinder. The excess band at the top becomes the purse strap. Overlap and stitch together the ends of the band to form a nice thick padding for your shoulder.

Tunisian in-the-round hooks are little harder to find than hooks for working flat. I really love the set I used to make this purse, but the company discontinued it! I've lost a few of them since then too...

This was delicious when it finished. Just pineapple rinds, sugar and wild yeast, mostly. Sorry there's not really much to see here, I just enjoy watching the bubbles go by, and figured others might too.

Also, fingers crossed this video works right! File hosted on a Pixelfed instance, direct-linked to from a PieFed instance, and posted to a Lemmy instance... That's pretty convoluted lol.

This is a little off the beaten track as far as usual foraging posts go, but I had a question. Has anyone tried spinning Eastern Tent Caterpillar webs into a usable thread/yarn? I'm definitely not one of those people who hates them and wants them gone; they're native here and relatively harmless, despite what naysayers would have you believe. However, they sure do make a ton of webs! I'm sure they could probably stand to part with a little here or there right? Like, after they're done with them?

!Communal tent of the Malacosoma americanum caterpillar

Not sure if it would work, but if it is spinnable, seems like it might be a convenient local source for an ahimsa silk alternative.

This is a very versatile technique in which you use a special tool (a gripfid) to split the plies of a yarn, and then feed other yarns back through. You can do some pretty amazing colorwork and stitch patterns with it. Everything I've made so far has this very pleasant and unusual "squishiness" to it. Most commonly it's done with 4-ply yarns, splitting them in half each time, but there are tons of other variations. Linda Hendrickson's books on the topic have been a huge help! Something I do that I don't think I've seen mentioned elsewhere is dipping the free ends of the yarn segments into hot wax. This keeps them from fraying as you work, makes them easier to insert into the gripfid, and makes them less likely to come loose.

[email protected] Bistitchual

c/bistitchual is a hobbyist textile community based on the popular subreddit of the same name. All needlecrafts are welcome, but it has a particular focus on: \- Utilizing multiple techniques in the same project (i.e. knitted sweater with tatted trim). \- Techniques too obscure to sustain their own dedicated community (i.e. nalbinding).

A bag made with interlaced sprang weaving, and a braided drawstring. Sprang weaving is amazing!! My brother abused the heck out of this thing for years and it held up really well. It's perfect for bags (and pants), because it's super stretchy width-wise and completely inflexible height-wise. I learned most of what I know from one of Carol James' books , but there's so much I haven't tried yet. Basically, the concept is that it's like weaving, but with only warp threads and no weft. You start with a warped loom, but then you twist the warp threads across each other. Each row you (usually) twist the threads across each other in a different way. Like maybe on row one you twist each thread with it's neighbor, and then on row 2 you skip a thread and do it again so the pairs are different, then on row 3 do the original pairs again except twist them the opposite direction, etc. In yet another example of modern historians wildly misunderstanding/undervaluing the "women's work" of ancient textiles, check out this amazing article on the history of tight-fitting colorful clothes! Spoiler, it was probably sprang.

Hi stitchers! I have a question for you, but I'll provide some examples/context first. So, depending on your crafts of choice, hopefully you'll be familiar with some of these.

First, the structure we most commonly know from (usually accidental) twisted knitting stitches. This same structure can be created through a technique called cross-knit looping, from the larger field of looping in general. And once more, it can also be created through the method of knooking. While the work is in progress, none of these techniques look anything alike, but the resulting structure is exactly the same, as seen here: !simple depiction of the structure of twisted stitches

Second, the structure we most commonly know from the simplest form of tablet weaving. Each card/tablet holding 4 threads is spun, and in that process those 4 threads are plied into 1 thicker yarn. But at the same time, a weft thread is being fed between these plies, and locking each card's yarn to the next: !simple 4 ply tablet weaving Well, this exact same structure can be created in reverse through a form (darning) of ply-spit braiding! Yarns that are already plied have their plies separated by a special tool, and a weft thread is fed through, connecting one to the next: !depiction of the method of darning in ply-split braiding

So finally my question to you: What other examples of this phenomenon have you observed? Textile structures that are generally identical, but created in wildly different ways. I really enjoy these and I'd love to hear about ones you've encountered in your crafting adventures!