It’s hard to tell, but I’ll do some poking around today.
The original hardware was drilled into the wood over the panel and sealed. The rudder had a pin that went through the mount and it’s own hardware. That pin likely bounced out and torqued the whole piece off.
Thank you for the advice!
I wish I could tell you.
My best guess is that the pin bounced out when i was trying to help my wife uncleat the jib and the pressure just ripped the rudder right off. It was just a perfect storm of a large wind gust, waves, and a hardware failure
That’s a good question. I’m pretty sure I can, those I might try to fit a different style since the original set up wasn’t great
If you were me, would you try to use the same wood that’s there or replace the whole structure?
This happened mid sail, but we were fortunate enough to get a tow back to the dock and on a lift
I’m glad it was this and not the mast
No orcas but maybe some very aggressive large mouth bass lol.
Glad to hear it might be repairable though. I spend god knows how long last month repairing hairline cracks in the hull, I’d at least like to do some sailing this season
First sail of the season
I took the boat out for its first sail this year and lost the rudder.
Do you guys think this is reparable or am I buying a new boat? It’d be a shame to lose her over something so stupid
This right here is the only thing I’m worried about
I like it a lot, and it got my wife into Fallout.
I’m not happy about the power armor, ghoul makeup, or the decision to have very obvious real world car frames rusting away. It nailed everything else in my book though.
All things considered it’s a blast to watch, and did I mention it got my wife into Fallout? She’s been asking questions about the lore, and she couldn’t care less about any other game outside of Dream Light Valley before this. If it gives us another thing to bond over and gets her into a series that helped me through some of the worst parts of my life, I’m all about it.
I wasn’t saying that playstation hasn’t sold more consoles. I also not arguing that it doesn’t have better games. It does, Microsoft is very clearly dropping the ball even after they acquired as many heavy hitters as they did. My biggest regret this generation was switching to a Series X from the PS4 instead of either tossing money at a PC or picking up the PS5.
What I’m surprised by is that the conditions when consoles have had didn’t seem to be taken into effect.
I find poor sales hard to believe taking into account the pandemic and supply chain issues both consoles faced for a couple years.
Please don’t take this as me being a dick, I’m genuinely curious. Why not just get a Series X and not buy disks?
I just started playing for the first time and did some of Emerald Grove and just completed the ruins near by that took me 5 hours. What an incredible game, I want to stop and talk to everyone. My first play through I’m trying to say and do things I actually think I would do since I created a custom character for the first go around.
I look forward to reading about its move set
I think you’re thinking about r/rimjobsteve
They sound like the Endermen from Minecraft
Not yet, but I have a plan to release coverage in the future. If you put a deposit down now I’ll give it to you sometime I determine in the future
Which slicer do you use
Hi everyone!
I'm curious to know which slicer you guys use.
I've been using the Creality slicer, but it seems like it pretty consistently crashes, and I've tried Cura but the print seemed stringy despite using the same settings.
How are Orca or Prusa?
How?
Does this hobby ever get easier or is it always like getting kicked in the nuts by Ronaldo?
Filament some how leaked up and burned on. I just don’t have it in me to keep tinkering. I just want to print
[SOLVED] Extruder clicking
Is there any reason that little silver part of the extruder wouldn’t move and start clicking while printing when printing at 205 in PLA. It seems to turn just fine without any filament in there otherwise.
I cleaned out a nozzle clog, but is it possible there’s junk in the hot end stuck?
Resolution: Thanks for your help everyone! It ended up being a nozzle clog that I didn’t get all the way out. I ended up heating the printer up and doing the cool down trick. That seemed to work as a last ditch effort before buying a new nozzle.
Fallout 1 tips
I recently picked up a PC and decided to give the original fallout game a try. Do you guys have any tips or tricks I should know before I get started?
Ender 3 V3 Neo Enclosure
Hi all! I was curious to see if anyone had any recommendations for an enclosure for the Ender V3 Neo. I found a few on Amazon, but they look like grow tents and wasn’t sure if that would work well. For a bit of context, it seems like an enclosure is a must have for ABS printing which is ultimately what I’m after.
Thanks everyone!
Ender 3 V2 Neo Bolt Sizes
I recently picked up an Ender 3 V2 Neo at auction. All the pictures looks great, I was told it functioned, and I saw some pictures of it put together.
Long story short either they didn't include the bolts to mount the screen/gantry or kept them.
Does anyone know what screen bolts and gantry mounting bolts I need? Thanks in advance!
68 Screeching Sounds
Hi everyone,
I have a 1968 convertible beetle that will start an idle for about two minutes while it makes a god-awful screeching sound before it dies. This seems to be a relatively new sound as last year it would start and at least idle before dying on acceleration.
Does anyone have any advice on what could be causing the screeching or why it would idle but not take acceleration? I’ve played with the auto choke a little bit, but it hasn’t made a difference as far as I can tell. The carburetor was also cleaned and rebuilt. The only other thing I can think of is, maybe there’s something caught in the fuel screen, old or the fuel pump is bad.
Thanks everyone I appreciate it!
What do we think the armed combat is going to be like?
It looks like we have a couple perks, but is it going to be viable until the late game?
Hello!
I’m glad I found this community and was curious to see what everyone else had. I picked up a 68 convertible Beetle a couple years ago.
What should I read next?
I have both The Institute and Fairy Tale on my list next, but do you guys any recommendations on which one I should pick up first?
First Sail with gear
We loaded up the Hunter 170 today to see how she would sail when loaded down with camping gear in preparation for next weekend’s trip to the Apostle Islands.
My wife is still a bit nervous, but feeling much more confident after today. Please ignore the watering can. She wanted to put a bit more weight onboard just in case.