Bitcoin miner Riot Platforms raked in $31.7 million in energy credits from Texas power grid operator ERCOT in August.
![Texas paid bitcoin miner Riot $31.7 million to shut down during heat wave in August](https://lemmy.ml/pictrs/image/495bdb6c-7b50-4873-bef1-2f62c5aead3b.jpeg?format=webp&thumbnail=256)
Bitcoin miner Riot Platforms raked in $31.7 million in energy credits from Texas power grid operator ERCOT in August.
![Texas paid bitcoin miner Riot $31.7 million to shut down during heat wave in August](https://lemmy.world/pictrs/image/53d57559-f7a8-47c0-8728-ebd387420850.jpeg?format=webp&thumbnail=256)
After being accused of cheating, one professional golfer has responded: He did cheat, and he’s sorry.
![PGA Tour Canada pro admits to cheating, apologizes](https://sh.itjust.works/pictrs/image/cd5cbe91-ac05-4e03-a696-8b3e753cbe73.webp?format=webp&thumbnail=256)
I don’t see how there can be anything other than a ban, either lifetime or a couple of years, which in this case is probably about the same since he’s 28.
This is more than just cheating. He took a card signed (i.e certified) by a fellow competitor, altered the score, lied when confronted, and finally admits it when further corroborated by the walking scorer.
From afar Macron sometimes looks like a capable leader, transitions for decent periods of petulant child, and finishes with clueless on major issues.
Nesco VS-12. Bought it a couple of cyber Monday sales back and it’s been a winner. Paid $99.
Use it for more than freezing food, leftover rice, remaining onion half, and even seal but don’t vacuum dishwasher or clothes washer pods when traveling so they don’t leak in the suitcase.
We’ve got a vacuum sealer so sometimes cube it up into portions for a quick thaw and add to salad, same thing but sized for a specific recipe, and sometimes just fling it in the middle of the room and devour it cave dweller style.
Only advice I can give, not knowing your learning style, is whatever CAD platform you choose will seem challenging until you "get" the mindset it uses. Not really hard, but all have an approach which will become natural after some time. Take something you did in Tinkercad in 10 minutes and recreate it in say freeCAD, initially it’ll seem like something so easy shouldn’t be this hard….in short order it’ll be a breeze.
There’s a ton of content out there for everything but a huge difference between being a teacher vs being an expert. People think it’s easy, just make a video of me doing something, but instruction is much more than that.
I like SketchUp for my woodworking stuff and wanted it to work with 3D but the shortcomings at the time weren’t worth it. The product could have changed so this could be dated.
Always seemed to fight getting models watertight which has been no issue with tinker, fusion, openscad, or freecad. Also, it was hard with curved objects. Lastly, it didn’t have parametric support which is a must for design once/use many things. As an example, I have a simple funnel with a lip to fit into bottles or whatever. Need one for a different container? Just a couple of adjustments and I’m printing.
Not saying not to use it but others have listed many alternatives for 3D that are superior. SketchUp seems to have a good community for questions it’s just that other tools have better (IMO.)
Totally agree with Bishma on Tinkercad, it has limits but you’ll be building stuff. I came from SketchUp which isn’t strong for 3D printing, played with Blender for a short bit then sucked it up and dove into Fusion.
I started watching videos from Paul McWhorter on YouTube who walks through things slowly instead of some of the other guys who go at a lightening fast pace, not saying they aren’t good but too many what just happened there moments. Paul’s videos are slightly dated but still strong for basics.
Wife got me into the hobby to go along with my other interests like woodworking and restoration, "something to keep him busy", but she’s a beast for scouring thingiverse and printables for stuff along with her own "what if" ideas. It’s great, sometimes I’m not interested in the object but getting there is so cool.
Could be semantics but I configure (tune?) my profile to brand and color and leave it unless a roll is printing oddly. Basically, I’m looking for adjustments to flow, retraction speed and distance. Overture black and white are the same but recently used a hot pink and bright green from two different manufacturers where my Cura Overture Black/white profile sucked.
I like them. Only issue I’ve had was self made, dropped a spool and it dented the cardboard which caused it to hang in the Sunlu dryer. Probably print some rings for my next bout of clumsiness.
I’m probably the only person that cares, but the weird way he sips water behind the bench has always been intriguing. Eyes glaring at someone with a sippy nipple pull of water from the bottle. Can’t find an image, but will next season.
I’ve heard about this which is to challenge card sharing obviously. Heading there next week and see if my location is doing it. Memberships are for households so what are they validating? Same address and over 16 is what defines the extra household card.
Can’t say I mind, guess there’s a few positions on it.
- It devalues my membership when extra cards are shared.
- I lend granny my card to see if she likes it and wants a membership.
- Major abusers, and I don’t know how this would work, sharing a single membership among many.
- Costco needs additional membership plans? Seems like this could be a system issue depending on what those would look like. Me and granny only go a couple of times a year so a multi-household plan with a limited number of visits? Feels like a stretch case.
Yee-Haw, livin' in Texas, Guns Up! This just sucks.
Also, it’s possible to overlay your linked map with current prices. https://www.ercot.com/content/cdr/contours/rtmLmp.html
The stories of folks with those contracts will start coming out in a month. Similar to the situation during the freeze a couple of years ago. Griddy in particular had a lot of lower income families who didn’t understand the implication of variable rates along with being told about "average" rates and then were stung when the bill showed up.
Evgenii Dadonov is sticking around in Dallas.The Stars signed the veteran forward to a two-year extension with an average annual value of $2.25 million, the team announced Tuesday. Dadonov was a pending unrestricted free agent. The Stars acquired him from the Montreal Canadiens prior to the trade de...
We’re in our first year with solar so this should be interesting. It’s brutal out there, ten minutes in the garage and I’m soaked.
This is sad. When these things happen I think about the times when there’s cold and ice in Texas, folks from the north point at the idiot southerners but when it comes to heat and they’re suffering it’s a "poor them" situation. These folks were from Florida and really do feel bad for them. This heat spell is deadly and you might feel fine now but in 30 minutes your world could be in a really bad place. Know your limits, you’re just as much a hero for hunkering indoors.
Geez, that’s like getting sucked into a blender. Horrible….
Looks like it’s American Family Insurance under the covers and they seem to have good reviews and lower customer complaints than usual. I just learned Costco offers this, thanks!
Interesting situation. Prigozhin has criticized the Russian military over the past few months and Putin has stayed silent. Now this and the military responds but Putin remains silent. Putin needs a weak military to avoid being overthrown, but the FSB opens an investigation, why? Prigozhin threatens to attack the russian military and comes up with a story/lie that he realizes the Ukrainian invasion was based on lies. What does Prigozhin want, money a coup?
DFW weather: Dangerous heat has moved in
We have noise ordinances, but let the folks working outside start early and get out of the heat.
On Monday the sports media business suffered another blow as The Athletic went through a round of layoffs. First reported by Ben Strauss of the Washington Post,
Looks like Saad Yousuf who covers the Stars is safe but Bob Sturm (Cowboys, The Ticket) is gone.
If the Senators trade DeBrincat, these three landing spots makes sense
The 38-year-old can still be effective if the team limits his role. But as long as he's in Dallas, it's hard to imagine that happening.