Skip Navigation
InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)CO
ConductiveInsulation @feddit.de
Posts 1
Comments 10
*Permanently Deleted*
  • So lange wie viele Projekte dauern würde es mich nicht wundern wenn Teilweise Pläne angefordert werden während ein anderes Projekt schon läuft und die Pläne erst aktualisiert wurden nachdem das andere Projekt schon gestartet ist.

  • Is the efficiency of a DC DC converter Load independent?

    I'm currently looking into various DC DC converters and was confused that the Meanwell DDR-60 series only shows a typical rating but says nothing about the efficiency at idle. From AC/DC converters I'm used to have a curve that starts at idle and maybe 70% and goes to 100% load, having the peak at ninetee something.

    (Edit: link goes directly to the PDF)

    5
    How to properly size a serial bulb for protection when troubleshooting a circuit?
  • It has the high current because it's cold, it only needs a short time to heat up and light up and the majority of circuits can handle very short overcurrent really well because the connections need to heat up before they break. Using a lightbulb for current limiting works pretty well.

  • How to properly size a serial bulb for protection when troubleshooting a circuit?
  • I've successfully used incandescent Bulbs in the past. They have barely any resistance when cold, which is the reason why they usually blow up when you turn them on.

    For their size, usually I use more than the power the device will use but less than the wires can handle for a while. In your case id get a lamp with a E10 socket, for example 3.5V 0,7W.

    Alternatively you can use a PSU with current limiting features.

  • *Permanently Deleted*
  • Bei der Registrierung kannst du nur was gegen spambots tun. Mit filtern und moderations Bots kannst du auch was gegen Leute tun die sonst nicht problematisch sind. Bestimmte reposts kann man schon durch den Titel erkennen, wenn Beiträge eine gewisse Anzahl von Reports haben aber gerade keiner da ist und Zeit hat ist es auch sehr praktisch diese Beiträge einfach filtern zu können damit man später entscheiden kann ob die Reports gerechtfertigt waren oder nicht.

  • Reddit: Nutzer streiken wegen umstrittener Preiserhöhung
  • Naja persönlich würde ich auch ohne finanzielle Kompensation weiterhin moderieren und ich habe kein Problem damit das sie Geld verdienen. Mir macht das echt spaß. Ich erwarte aber funktionierende und gut durchdachte Tools. Ich erwarte dass Probleme und Vorschläge nicht direkt ignoriert werden. Ich erwarte Support von den bezahlten Admins. Ich erwarte Faire Preise für alle deren API Zugriffe für Reddit wert haben, warum soll Apollo so viel zahlen wenn die Inhalte darüber überhaupt erst auf die Seite kommen?

  • *Permanently Deleted*
  • Filtern wäre auch extrem wichtig. Meiner Meinung nach. Neuer unbekannter Nutzer? Ab in den Filter und irgendwann manuell überprüfen. Gleiches für bestimmte Problemthemen oder so. Bestimmte Dinge lassen wir auch durch Bots melden.

    Aber ich kann mir durchaus vorstellen dass diese Dinge früher oder später kommen werden. Bis jetzt kämpfe ich noch mit paar Kleinigkeiten der App Jerboa.

  • *Permanently Deleted*
  • Vermutlich möglich, hab keine Ahnung wie viel Aufwand die Programmierung ist.

    Der automoderator selber lässt sich in extrem leichten Skripten konfigurieren, wir benutzen ihn hauptsächlich um Beiträge nach bestimmten Kriterien zu filtern damit sie sich jemand manuell anschaut bevor sie wieder freigegeben werden.

    Der automoderator und der repostmasterbot nehmen uns einen riesen Teil der Arbeit ab.