Steam Deck @sopuli.xyz twistypencil @lemmy.world 11mo ago

disable wake on bluetooth?

When I turn on my headphones, my oled deck turns on. Neat, but unwanted when I'm using my headphones for other things, like my zoom meeting for work causing Dave the Diver sounds to come out of my headphones. How can I turn that off without disabling Bluetooth every time I put the deck to sleep?

11 comments

This is interesting as I'm looking for the opposite answer. I want my Deck to wake up when I turn on my Xbox controller, but it doesn't right now unless I wake it up with the power button first. If you find something outside of this thread, please let me know.
- Only the new OLED decks have the Bluetooth chips with wakeup. If you have an OG deck, you're plum outta luck, I'm afraid.
  
  Damn. Oh well. Good to know though. Thanks!
- I have the USB wireless receiver for my Xbox controller and it works on the steam deck to wake it, but I needed to install a driver. And I need to reinstall it every time I update my steam deck.
  
  Where did you get the driver for it?
- Do you have the oled deck? It has a new bt chip and firmware that enables this
- the OLED deck has the feature from what I can tell to wake in Bluetooth.
  
  my older LCD deck, does not seem to have the feature.

Try putting a script like this in /lib/systemd/system-sleep/. Make sure it is executable.

#!/bin/sh

case $1 in
	pre)
		bluetoothctl power off
		;;

	post)
		bluetoothctl power on
		;;
esac

What I said before, looks like a dead end.

~~Start with "cat /proc/acpi/wakeup" and "lspci". My LCD deck doesn't have the new BT chip with wakeup, but I think it might go like this~~

Look at lspci, find the Bluetooth there (Maybe it's just part of the wifi?). Note its PCI address, and find a value in /proc/acpi/wakeup that corresponds to that. Take the name from the first column of /proc/acpi/wakeup, and do something like "echo GPPn | sudo tee /proc/acpi/wakeup" . If this works, then you'll want to (a) make a slightly more permanent version of this per the arch wiki, and (b) remember to undo that when Valve finally gets around to doing a proper control for this.

https://wiki.archlinux.org/title/Power_management/Wakeup_triggers

I do not see a BT device in lspci, and the Network Adapter PCI address doesn't show i /proc/acpi/wakeup,

I tried to create a systemd unit file that would issue an rfkill on bluetooth on suspend, and then re-enable it on resume, but that didn't work either. Interestingly, if I do systemctl stop bluetooth the bluetooth service stops, and then immediate starts again!

(A)(root@steamdeck deck)# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Root Complex
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] VanGogh PCIe GPP Bridge
00:01.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] VanGogh PCIe GPP Bridge
00:01.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] VanGogh PCIe GPP Bridge
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Internal PCIe GPP Bridge to Bus
00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Internal PCIe GPP Bridge to Bus
00:08.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Internal PCIe GPP Bridge to Bus
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 71)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] VanGogh Data Fabric; Function 7
01:00.0 Non-Volatile memory controller: Kingston Technology Company, Inc. OM3PDP3 NVMe SSD (rev 01)
02:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01)
03:00.0 Network controller: Qualcomm Technologies, Inc QCNFA765 Wireless Network Adapter (rev 01)
04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 1435 (rev ae)
04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Rembrandt Radeon High Definition Audio Controller
04:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] VanGogh PSP/CCP
04:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] VanGogh USB0
04:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] VanGogh USB1
04:00.5 Multimedia controller: Advanced Micro Devices, Inc. [AMD] ACP/ACP3X/ACP6x Audio Coprocessor (rev 50)
05:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Zeppelin/Raven/Raven2 PCIe Dummy Function (rev 61)
06:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] VanGogh SecUSB

(A)(root@steamdeck deck)# cat /proc/acpi/wakeup 
Device  S-state   Status   Sysfs node
GPP0      S4    *disabled
GPP1      S4    *enabled   pci:0000:00:01.2
GPP2      S4    *enabled   pci:0000:00:01.3
GPP3      S4    *enabled   pci:0000:00:01.4
GPP4      S4    *disabled
GPP5      S4    *disabled
GP17      S4    *enabled   pci:0000:00:08.1
XHC0      S4    *enabled   pci:0000:04:00.3
                *disabled  platform:dwc3.1.auto
XHC1      S4    *enabled   pci:0000:04:00.4
GP19      S4    *enabled   pci:0000:00:08.3
XHC2      S4    *disabled  pci:0000:06:00.0
```*___*

Oop. Look up. I changed the parent post, maybe this time it'll work?

11 comments