Recommendation for NAS hardware
Recommendation for NAS hardware
Hi,
I am looking for building a NAS with used hardware, mostly for media, because my current Dell 7050 only has a 500gb hdd and I am tired of running low on space constantly.
I have a few questions:
- I am currently running containers for Jellyfin, Radarr and Sonarr, if I buy a new machine for NAS, it makes sense to migrate every media-related container to the NAS drive, correct? The Dell machine I have has a 7th gen Intel CPU, that is able to transcode H265 perfectly, which is a big bonus. So if I end up moving it, the machine I buy needs to do the same, I suppose.
- If so, then I guess using TrueNAS is not the way to go, and instead use a simple debian or ubuntu server distro for simple sharing?
- If TrueNAS is the answer, then I should aim for ECC ram. If that's the case, I am not aware of cheap/budget workstations that have ECC ram, but if you have recommendations for one, great;
- If you think I should instead buy something with an i3/i5/i7 or Ryzen processor, what kind of machines would you recommend?
- I was looking to find something for around 150/200€, excluding hard drives. Not sure if that is possible.
Thank you.
If the only issue is running out of disk space, why not just buy a larger hard drive to replace the 500GB with?
Also, ECC is always helpful, whether you run truenas or not, but in no way is it a requirement for truenas more than for any other OS. If you want to read more about it, click here for Jim Slater's blog (a fantastic ZFS resource).
Because the Dell 7050 is a micro computer with only a 2.5 HDD slot. I would like to have at least 4.
You can find cheap server chassis in my country for €100 for 2U/3U/4U with plenty of bays since it’s ultimately just a case. There’s plenty of space for any board in the case and you can get mount adapters for desktop boards to mount in server cases. Personally I’d build a bare metal Arch Linux host and run everything as Docker containers running on ZFS RAID-Z but TrueNAS etc is fine if you’re not familiar with building the host yourself. Arch has great documentation for every kind of service you’d want to run on the host.
As of right now, I live in a small studio, so noise is an important factor, forgot to mention that. I thought about server chassis but for them to be cheap enough, they will also be expensive and power hungry. So I was leaning more towards tower builds.
Something I'm looking at myself is HP elitedesk 800 gen3 Tower. Mobo has 5 sata ports in addition to 1 nvme port. It takes 6/7th gen cpu so you could reuse your current cpu. 4 ram slots DDR4@2400.
What is especially appealing is the 5.25 slot for which icydock has a powered bracket that takes and powers 4 SSD disks. (Edit: ejectable too). Sure the chassis has internal space to accomodate even more HDD.
With Proxmox on the nvme + some raidz zfs action would make for a nice HCI setup. My next build and might inspire yours.
Yes, that's what I am considering, at the moment. But I will go for Dell or Lenovo, don't want anything HP. Maybe with a Xeon and ECC RAM, for about 150 euros.
If you have an old workstation and drives just around I would recommend looking into unraid.
Why Unraid in particular? I know it's a paid OS, which makes me wonder why go that route. I think I would rather have a simples SMB share in a linux environment, instead of paying for something like that.
The community documentation is really good; this makes it super easy to find out how to do something or fix an issue. Adding a drive is super easy , and doesn’t require all the drives to be the same size, you can mix and match. It also supports docker on top of all of that. If you’re willing to manage all of that yourself from scratch , then I doubt you’d like it. It’s convenient for most people that don’t want to spend a lot of time managing and troubleshooting their nas.
Smolyeetcoverded most of it. Basically if you're using older Hardware it's going to meld better for just pick a parting.