Right angle clamp by stenokit
Right angle clamp by stenokit
ENGLISH This simple clamp can be used to keep two boards at a right angle while the assembly is curing. I posted an all-in-one STL including the four parts and a 0.2mm height adhesion brim. And of course all parts as individual STL's. No supports are required. I suggest a filling of 20% to 50%. Addi...
ENGLISH This simple clamp can be used to keep two boards at a right angle while the assembly is curing. I posted an all-in-one STL including the four parts and a 0.2mm height adhesion brim. And of course all parts as individual STL's. No supports are required. I suggest a filling of 20% to 50%. Additional hardware required : M8 nut M8 x 80 (or longer) scew/bolt FRENCH Un serre-joint d'angle simple pour assembler deux pièces en attendant que la jointure soit permanente. Un STL regroupe les quatre pièces avec une couche d'adhérence de 0,2 mm. Et bien-sûr il y les STL des quatre pièces individuelles. Aucun support n'est requis. Je conseille un remplissage entre 20 et 50%. Quincaillerie nécessaire : Ecrou M8 Boulon/vis M8 x 80 (ou plus long)