Skip Navigation

Autonomous LED Driver Dev Board Schematic

Greetings! I've been throwing this schematic together as I want to experiment with the TI LP5812 IC which is an i2c controlled autonomous matrix LED driver. I am a novice when it comes to electronics so I'm looking to see if I've missed anything in this demo board schematic.

The intended purpose of this circuit will be to provide a playground to experiment with different lighting patterns by allowing the user to interact with two of these LP5812 ICs over i2c as each can only drive 4 RGB leds each.

My main points of concern: Making sure that I haven't missed anything critical in the rather dense TI datasheet https://www.ti.com/lit/ds/symlink/lp5812.pdf?ts=1710689049125 as well as making sure that my schematic makes sense.

I chose not to include i2c pullups on this dev board as I felt that was best left for the host to configure, but I'm happy to learn. Thank you!

Here's a link to the KiCad project if you'd like to see more https://github.com/scytherswings/Starlight-LP5812-Dev-Board/tree/main

3
3 comments