3DPrinting @lemmy.world LazaroFilm @lemmy.world 4mo ago

I made a new tool for camera operators and its shell is 3D printed.

CyberLevel is a digital horizon indicator that is gyro compensated. Basically it’s a bubble level that doesn’t go crazy when moving it always shows true level.

7 comments

How does it work?
- Looking at the product page, this appears to be a sensor/indicator you put on a camera/monitor to determine if the shot is level. It probably has a microcontroller doing sensor fusion of gyroscopic/accelerometer sensors to present a smooth result.
  
  That’s for that link. I had no idea the black circle was even a screen. Neat device!
  
  It's either that or has something to do with their follow focus devices. It's shaped like a their remote devices but I'm not sure what sort of data it would relay.
  
  You nailed it! It’s an IMU sensor with accel/gyro fusion. Then it uses a Rp2040 (pi pico chip) and a touchscreen to manage settings.
New Lemmy Post: I made a new tool for camera operators and its shell is 3D printed. (https://lemmy.world/post/12976237)
Tagging: #3dprinting

(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)

I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md

7 comments