What to use as DHCP server?
What to use as DHCP server?
Hello everyone,
first time ever posting on lemmy, feels good š
I have a question regarding DHCP in my local network.
My current setup is as follows:
- DHCP provided by router (Fritz!Box 7490)
- DNS provided by pi-hole hosted on a raspberry pi
- DHCP pushes the IP of the raspberry via DHCP to all clients
My problem is: When the raspberry pi (running pi hole) is down for any reason, none of my devices has internet access anymore. This is due to the fact that the Fritz!Box router (aka DHCP server) has no option to push a secondary DNS as a fallback to its clients.
One option would be to buy another router which has the option to push a secondary DNS, which I would prefer to avoid, since otherwise I am happy with the Fritz!Box.
So I am looking for alternative configurations with my existing hardware. I could for example use pi holes DHCP. Or I could use the DHCP server package of a synology NAS which is also part of my local network. Or is there another option, maybe using some DHCP service on the raspberry pi or in a docker container or something like that? Does anyone have experience with one of these setups and can tell me if it is possible to provide the clients with two (prioritized) DNS options? What would you recommend? Thanks!
You're viewing a single thread.
To me it sounds like you don't have a DHCP problem at all, the issue is no website can be resolved when your DNS is down (PiHole).
You really have two options:
- Make sure the PiHole stays up 24/7, with minor downtime for maybe a reboot or an update.
or
- Setup an additional raspberrypi with PiHole and use gravity-sync to keep them synced. Then, I would run ISC-DHCP server on both the raspberrypi's, one as the primary and the other as the secondary. That way you can specify both of your DNS servers. Make them authoritative and disable your routers DHCP. You can take a look at this guide:
https://stevendiver.com/2020/02/21/isc-dhcp-failover-configuration/
Personally, I like to keep the wife happy so I have option 2 at home, that way the internet never goes down when I tinker.
Edit: Didn't notice you said your router can't issue out two DNS servers. I've never heard of that.
Keepalived (or similar CARP or VRRP virtual IP system) would allow you to run 2 piholes that share the same virtual IP.
If the main goes down, the backup will take over the virtual IPLol, this is peak selfhosted. The obvious solution is to get a router/DHCP server that is normal enough to push out two DNS servers.
The selfhosted way is to set of keep alived or a load balancer, because why the fuck not.
Nice, but you don't need this per se. If you have two Piholes doing DNS, one of them can do DHCP and push the two pihole DNS server addresses. If the one with DHCP goes down temporarily you will not get a new addresses, but DNS resolution continues one the one running.
This would be great except OP said that their router can't push 2 DNS addresses. Otherwise, ya, redundant services is always best
Thanks, didn't notice that. I edited my comment to reflect.
No worries, I had the same thought at first and was very confused for a minute
Even if your router can issue two DNS servers you shouldn't add a second that's not a pihole.
Otherwise a client will just fail over any blocked lookups to the secondary, negating the purpose of a pihole.
Edit: Didn't notice you said your router can't issue out two DNS servers. I've never heard of that.
Ugh. When I moved into my new place I bought a NetGear Orbi system to hold me over until I got my Ubiquiti gear put in place. Never again.