Home assistant cheap pool sensor?
Home assistant cheap pool sensor?
Hello!
I moving to a new home with a small pool and I was thinking of buying a pool sensor.
Right now I'm searching for something simple like temperature but would be nice to have ph and others.
I'd like it to be local, no cloud, and right now something cheap, I love DIY stuff.
So, any recommendations? Any experiences with these kind of sensors? My searches lead to pretty expensive stuff that can measure all the pool parameters and cloud based.
Thanks for reading!
You're viewing a single thread.
I built a pool water temp sensor using an ESP32 and a DS18B20. I drilled a hole in the pump intake pipe, installed it and now I always know the temp of the pool.
I cant find the original page I used to build it but it wasnt hard and there are similar guides online. Here is the code I am using on the ESP32
esphome: name: esp-pool-temp
esp8266: board: esp01_1m
Enable logging
logger:
Enable Home Assistant API
api:
ota: password: "fa053faa36e5d6600a5613086aaca3ca"
wifi: ssid: <SSID> password: <password> fast_connect: true
Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Pool-Espboard Fallback Hotspot"
password: "MCueN8HiEEvS"
captive_portal:
Example configuration entry
dallas:
- pin: GPIO4
Individual sensors
sensor:
- platform: dallas address: 0xE93C01D607349D28 name: "Pool Temperature"
- platform: wifi_signal name: "WiFi Signal" update_interval: 60s
Nice idea! Will study the possibility in my pool. Thanks!