I'm just gonna stick to slotted, thanks
I'm just gonna stick to slotted, thanks
Fun fact: Torx screwdrivers are compatible with Torx Plus screws, but Trox Plus screwdrivers are only compatible with Torx screws that are one size larger
You're viewing a single thread.
I have to admit that each time I saw a torx security screw on a case I had to open (looking at you, Compaq) this made me so angry that I used to punch the middle pin away with a flathead screwdriver, and replace the screw with a regular one later. This was in those past times I did not have a fuckton of assorted torx bits in a gigantic case...
Didn't Compaq use to have those torx with a slit in them where you could put a flathead screwdriver in the slit part?
I know HP uses those on some computers. Pretty neat design, if you ask me!
Yes I've always referred to them as Compaq screws but mainly because I personally saw them on Compaq first. I think HP bought Compaq at some point and that might explain why they are used on both brands. Don't know which brand started using them first.
I would have rather had they just used Phillips screws but as far as weird screwheads go these aren't too bad.
At least the good thing about them is the threads are standard and they can be replaced with a Phillipshead case screw just as well.
I'm with you. I've replaced all the torx screws on my Dell with Philips head screws because fuck you Dell. (all the screws inside were already Philips)