Prepping for my next dive trip to Playa Del Carmen
Prepping for my next dive trip to Playa Del Carmen
My current dive kit:
- XDEEP Ghost Deluxe with both back cargo pockets (one for backup mask, other for SMB+line)
- Apeks XTX50 with DIN DST and yoke converter for travel (at the moment, I’m diving with pretty standard length hoses, but may move to long hose in the future) I use a bungee necklace for my octo, so take a bit of a hybrid approach.
- Shearwater Perdix with AI sensor
- I have an old Oceanic watch dove computer as a backup
- Cressi Digi 2 as an in-line backup to my dive computer as well. I’m not afraid to have my pressure be digital. If that ever breaks, then I may change my mind. It’s nice to have the digital depth as well in case my dive computer ever malfunctions.
- Backup ScubaPro compass
- Fins are not pictured, but currently using Folding Fins. I really like them except the way that the boot holder clips into the base feel like a bit of a point of failure. Have been exploring travel fins, but they all appear to be positively buoyant, which I’m not sure about.
- My masks are both Hollis M-1. Highly recommended for comfort and visibility.
- Sola Wrist Light
- DiveRite CX2 as my backup light
- I carry standard line scissors and a Zeagle Line Cutter
- Camera is not pictured, but is a DJI Action 2 in a waterproof case with a handle. If I use the double case, it will last two hour-long dives. If I use the single case, it’s about 1.5 dives. It really varies though based upon resolution and whether I keep it on the whole time.
- I have an XDeep bolt snap on my primary second stage reg and the one with the larger hoop on my Digi 2 pressure gauge. The octo uses the bungee bolt snap system in case I want to clip it off instead of using the necklace. I’m doing PADI Rescue Diver soon and they don’t teach using a necklace, so I’m forced to do it their way for that course, then will go back to necklace.
- Wetsuit is 3 mil Henderson
- ScubaPro booties, hood, and gloves
- I found that a roll-up tool bag works nice for a save-a-dive kit.
- Additionally, I alway pack some o-ring lube because I hate having a hissing connection with the yoke.
Thoughts?
You're viewing a single thread.
Is this a tech dive trip or a recreational dive trip? If it was recreational I prefer to pack light. 1 mask, 1 primary light, 1 computer, etc... If my mask breaks I'll stop by and buy one from the many shops.
To me it's not worth the Hassle to bring a ton of spare/redundant equipment.
Technical diving trip... You're gonna need more gear 😉
Just saw your comment. To respond, this was a reef dive trip, however we do cenotes, which are cavern dives if they close the port due to bad weather. Have done that a few times now. Also do a lot of night dives here. Just finished up and leaving tomorrow. Was able to fit everything in my carryons. From my experience, I have seen someone need a new mask right before a dive started as well as during a dive even though we found it and got it back on them. I have had my primary light fail during a dive and have also been lost in no viz and used my analog compass to find the bank of the inlet I was diving where the Perdix compass was a bit finicky. Based upon the reading that I’ve done, such as the book Under Pressure, I feel that a DIR-style mentality is ideal and try to use the same setup every time, so that I know exactly where everything is and how to access things. This trip, I ended up doing 8 dives altogether. One was a small wreck penetration and the rest were walls and reefs. It was good to know that I had my backup stuff and made use of my analog compass when some of the divers were lagging behind, so I could aim us in the correct direction of the DM disappearing in the distance. Was a lot of fun. This was my first dive with the Apeks aside from a pool test. Worked fantastic and was fortunately able to do DIN cylinders instead of having to use my yolk converter. My only critique is of the XDeep. I find that the air does not distribute evenly all the time due to the taco that it creates around the cylinder. It will glue back and forth as you shift during the dive. Additionally, the dump valve is hard to grab with gloves, but I get that it is in a place that is possibly less prone to snags. Nailed trim and buoyancy this trip. Was exciting to feel the progress and glide along with ease.