Use for empty small propane tanks?
Use for empty small propane tanks?
I've got several of these empty steel propane tanks from heating the chicken coop during the recent cold weather before I got an adapter to run the heater off of a larger refillable tank. Any ideas on what they could be repurposed for?
Seems like there should be some use for them besides tossing them in the recycling. I'd assume I'd need to poke a hole in them before recycling since they are/were pressure vessels.
I know there are adapters out there to refill them but now that I can use a larger, more easily refillable, tank I don't really have any inclination to do so.
My only thought so far was to cut the top off, drill some holes, and make a little stick burning camp stove. But, that's not something I'll ever use.
I've got a fairly extensive workshop and metal working tools so pretty much everything is on the table. I can even do really shitty welding if required.
You're viewing a single thread.
Nothing. It's why they are being phased out. recycle them at any place that sells propane tanks.
I hadn't heard that. What are they being replaced with?
California (only so far) banned specifically disposable propane tanks of any size.
Small propane canisters will still be available, but they must provide provisions for being refilled and reused. Which is fine by me, I always hate throwing the steel tanks out at the end of a camping season and usually try to refill them if I can.
It would be nice to refill them instead of taking 5 partials left over from previous trips.
Reusable ones. Looks like it's only California: https://www.msn.com/en-us/money/other/camping-with-propane-canisters-in-california-is-set-to-change-how-to-choose-what-to-buy-now/
They've always been refillable with an adapter from the hardware store but it's an enormous pain, so few people bother. I've always hoped Coleman would start an exchange program at REI or somewhere similar.
If I recall, the adapter hooked to a grill tank but to fill the green cans you had to have the larger tank above the smaller one and it's impractical for most people.
And upside down, and that will still only fill it 2/3 or 3/4...
I've read tricks like chilling the cylinders. And depressing the Schrader valves. But some sound pretty sketchy.